Twin; Swap - JVC LT-37X898 User Manual

Twin

Activate the split-screen option by pressing T
the remote control. The channel (or input) you were
watching before pressing T
the new channel will appear on the right. The sound
will continue to come from the main screen channel
(or input). To turn split-screen off and return to
normal television viewing, press T
the B button.
ACK
At first, select TV mode to use the TWIN function.
Notes:
• Main Screen and Split Screen will not display the same channel or input at the same time.
• You can enter the TWIN mode when the screen is in NORMAL mode.
• Split screen picture will not display digital channels and HDMI.
• Split-screen functions will not work with locked channels or channels blocked by V-Chip
ratings limits. A gray screen will display instead.
• Split screen picture will not display the picture from the component terminal and the HDMI
terminal.
• The aspect of Main Screen Picture becomes 16:9 when you input the picture of 480p,
720p and 1080i from the component terminal and HDMI terminal.
• After you press the S
OK button, select normal screen. If you don't operate, the Main Screen Picture will be
automatically selected about 8 seconds later.
• When you are in TWIN or FREEZE mode, you cannot change the aspect ratio.
• When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.
• When you are in PC mode or 1080p mode, TWIN, SWAP, SELECT and FREEZE cannot
be used.

Swap

You can exchange the channel (or input) displayed in the split screen window for the main
screen image by pressing the SWAP button.
At first, select TV mode to use the SWAP function.
Notes:
• It will only work in TWIN mode.
• If the signal that you are watching is coming from the HDMI input, you cannot enter the
SWAP mode.
will appear on the left,
WIN
again or press
WIN
button, and select split screen picture when you press the
ELECT
Button Functions
on
WIN
MAIN SCREEN
PICTURE
07 V-1
SPLIT SCREEN
PICTURE
67