Button Functions
Return +/TV
The R
+/TV button has three functions:
ETURN
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
Press the R
The channel currently active has been programmed as your return+ channel. Now scan
Press the R
• To cancel your return+ channel, press and hold the R
The message "RETURN CHANNEL CANCELLED!" will appear.
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel
return+.
Light
All remote control buttons are illuminated, except for the Light button. Press the L
to turn the illumination on for 5 seconds.
Menu
The M
button allows you to access JVC's onscreen menu system. Press M
ENU
the onscreen menu system. When a menu is displayed, press the M
• See individual topics like "Sound Adjust" for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus.
Back
This button allows you to go back in the menu to change a selection or correct a mistake.
60
+/TV and hold for three seconds
ETURN
RETURN CHANNEL
PROGRAMMED!
through the channels using the C
+/TV
ETURN
You will return to your programmed channel.
+/– buttons.
HANNEL
+/TV button for three seconds.
ETURN
button to exit.
ENU
button
IGHT
to activate
ENU