Environmental Requirements - Acer Aspire 1360 Series Service Manual

AC Adapter
Item
Over Voltage Protection (OVP)
Short circuit protection
Electrostatic discharge (ESD)
Dielectric Withstand Voltage
Primary to secondary
Ground leakage current
Power Management
Power Saving Mode
Standby Mode
Enter Standby Mode when
1.Standby/Hibernation hot-key is pressed
and system is not ready to enter Hibernation
mode.
2.System standby/ Hibernation timer expires
and system is not ready to enter Hibernation
mode.
Hibernation Mode
Enter Hibernation Mode (suspend to HDD)
when
1.Hibernation hot-key is pressed and
system is ready to enter Hibernation mode
2.System Hibernation timer expires and
system is ready to enter Hibernation mode.
Display Standby Mode
Keyboard, built-in touchpad, and an external
PS/2 pointing device are idle for a specified
period.
Hard Disk Standby Mode
Hard disk is idle within a specified period of
time.

Environmental Requirements

Item
Temperature
Operating
Non-operating
Humidity
Operating
Non-operating
Non-operating
Vibration
Operating
Non-operating (unpacked)
Non-operating (packed)
Chapter 1
29V
9.5A @19V output voltage
15KV (at air discharge)
8KV (at contact discharge)
2150VDC for 1 sec.
less than 250uA
The buzzer beeps
The Sleep indicator lights up
All power shuts off
The display shuts off
Hard disk drive is in standby mode.
(spindle turned-off)
°
+5~+35 C
°
-20~+60 C
10% to 95% RH, non-condensing without disktte
10% to 80% RH, non-condensing with disktte
20% to 80% RH, non-condensing (Unpacked)
20% to 90% RH, non-condensing (Storage package)
5~250Hz 0.5Grms, 15mins per axis
1.04 Grms, 2-200Hz 15 mins per axis
1.04 Grms, 2-200Hz 15 mins per axis
Specification
Phenomenon
Specification
29