Table of Contents
Advertisement
Preparation
The u nit can r ecord still pictures
or motion
pictures
toan SD card or built-in
memory.
To record
toan
SD card, read the following.
Cards
that you can use with this unit
Use SD cards
conforming
to Class 4 or higher
of the SD Speed Class Rating for motion
picture
recording.
Please confirm the latest information
about SD Memory Cards/SDHC
Memory Cards/SDXC
Memory
Cards that can be used for motion picture recording on the following website.
http:flpanasonic.jplsupportlgloballcsle_cam
(This website
is in English only.)
• Keep the Memory Card out of reach of children to prevent swallowing.
Inserting/removing
an SD card
When using an SD card not from Panasonic,
or one previously used on other equipment,
for the first
time on this unit, format the SD card. (4 22) When the SD card is formatted, all of the recorded data
is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access
lamp has gone off,
Access lamp [ACCESS] O
• When this unit is accessing
the
SD card Qrbuiltqn memory, the
access lamp lights up.
1
Open
the SD card
cover
and
insert
(remove)
the
SD card
into
(from)
the
card
slot
O.
• Face the label side _ in the direction
shown in the illustration and press it straight in as far as
it will go.
• Press the center of the SD card and then pull it straight out.
2
Securely
close
the SD card
cover.
• Securely close it until it clicks.
14
VQT4Q73
Advertisement
Table of Contents
