Table of Contents
Advertisement
Charging
the battery
I
When this unit is purchased,
the battery
is not charged.
Charge the battery
fully
before
I
using
this unit for the first time.
I
The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always
"live" as long as the AC adaptor is connected
to an electrical outlet.
Important:
• Do not use the AC cable with any other equipment
as it is designed
only for this unit. Also,
do not use the AC cable from other
equipment
with this unit.
• The battery
will not be charged
if the unit is turned
on.
• It is recommended
to charge the battery
in a temperature
between
10 °C and 30 °C (50 °F
and 86 °F). (The battery
temperature
should
also be the same.)
1
Connect
the
AC cable
to the AC
adaptor,
then
the AC outlet.
Connect
the AC adaptor
to the DC
input
terminal.
• The status indicator will flash red at an
interval of 2 seconds (approximately
1 second on, 1 second off), indicating that
charging has begun.
It will turn off when the charging is
completed.
O
DC input terminal
•
Connecting
to the AC outlet
It is possible to use this unit with power
supplied from the AC outlet by turning on the
unit with the AC adaptor connected.
When recording for a long time, keep the AC
adaptor connected
and use it together with the
battery.
•
To charge by connecting to
other device
It is possible to charge by connecting to other
device with the USB cable (supplied).
• Do not use any other AC adaptors except the supplied one.
• We recommend
using Panasonic
batteries. (4
10, 29)
• If you use other batteries,
we cannot guarantee the quality of this product.
• Do not heat or expose to flame.
• Do not leave the battery(ies)
in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
12
VQT4Q73
Advertisement
Table of Contents
