Basic Playback; Playing Back The Video - Canon FS1 Instruction Manual

1
Press to display the joystick
guide.
If does not appear on the joystick
guide, repeatedly push the joystick
( ) toward [NEXT] to display it.
2
Push the joystick (
The camcorder plays back the last
scene (but without sound) and
returns to record pause mode.
Deleting a Scene After Recording It
After recording a scene:
1
Review the scene as described in
the previous section.
2
While reviewing the scene, select
( ) the icon and press
3
Select ( ) [YES] and press
NOTES
• Avoid any other operations on the
camcorder while the scene is being
deleted.
• You will not be able to delete the last
scene if after the scene was recorded
you changed the operating mode or
turned the camcorder off.
) toward .
.
.

Basic Playback

Playing Back the Video

1
Set the mode dial to
2
Turn on the camcorder.
The scene index screen appears
after a few seconds.
3
Move ( , ) the selection
frame to the scene you want to
play back.
Repeatedly press
extend the selection frame and
browse through whole index pages.
4
/
Press or
playback.
• Playback will start from the scene
selected and continue until the end
of the last scene recorded.
/
• Press again to pause the
playback.
( 21)
.
or to
to begin the
33