Volume; Return+/Tv; Sound; Muting - JVC LT-32E488 User Manual

Button Functions
Volume +/–
Use these buttons to raise or lower the TV's volume level. The maximum is the level you set in
Volume Limit. See page 51.
Return +/TV
The Return+/TV button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
Press the R
The channel currently active has been programmed as your return+ channel. Now scan
Press the R
• To cancel your return+ channel, press and hold the R
The message "Return Channel Cancelled !" will appear.
• Return+ works only with the C
return+.

Sound

By pressing the S
OUND
Smart Sound on or off.
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.
Smart Sound - Decreases high sound levels, giving a regulated sound level.
Press the S
To select "A.H.S." or "Smart Sound"
π †
è
To choose the setting
Press the M
Note:
• Smart Sound may become an unnatural effect, depending on the signal source.

Muting

The M button instantly turns the volume down completely when you press it. Press
UTING
M and the volume level will instantly go to zero. To restore the volume to its previous
UTING
level, press M
UTING
58
+/TV and hold for three seconds
ETURN
Return Channel (123-456)
through the channels using the C
+/TV
ETURN
You will return to your programmed channel.
+/- buttons. Pressing any number key will cancel
HANNEL
button, you can change the A.H.S. (Advanced Hyper Surround) and
button
OUND
when finished
ENU
again.
Programmed !
HANNEL
ETURN
+/- buttons.
+/TV button for three seconds.
Sound Effect
A.H.S.
Smart Sound
OK
Select Operate
Off
On
MENU
Exit