Sony KDP-51WS655 Service Manual

Sony KDP-51WS655 Service Manual

Color rear video projection
Hide thumbs Also See for KDP-51WS655:
Table of Contents

Advertisement

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

SERVICE MANUAL

MODEL NAME
KDP-51WS655
KDP-57WS655
ORIGINAL MANUAL ISSUE DATE: 8/2004
:UPDATED ITEM
REVISION DATE
8/2004
10/2004
3/2005
9-965-970-03
REMOTE COMMANDER
RM-Y915
RM-Y915
SUBJECT
No revisions or updates are applicable at this time.
Corrected Note from section 2-12-1. Setup For Adjustment. Note is intended for use by the factory
during production, and should not be performed by service technicians.
(Replaced Page 41 with Page 41)
Added Caution statement (Replaced Page 6 with Page 6)
Corrected service mode list (Replaced Page 25 with Page 25)
Added BH Board (PN A-1071-980-A) PWB (Replaced Page 82 with Page 82)
Added alternate BH Board PN to Exploded View section (Replaced Page 91 with Page 91)
New CRTs & Shades introduced for KDP-51WS655 Affects SNs 8,500,001 and up
Updated PN for Blue Shade and Lens for KDP-57WS655
New CRT Coupler Assemblies introduced for KDP-57WS655
Affects SNs 9,702,147-9,702,444 and 9,713,504 and up (Replaced Page 92 with Page 92)
COLOR REAR VIDEO PROJECTION
AX-1X
DESTINATION
CHASSIS NO.
US/HAWAII
SCC-M39A-A
US/HAWAII
SCC-M39B-A
CHASSIS

Advertisement

Table of Contents
loading

Summary of Contents for Sony KDP-51WS655

  • Page 1: Service Manual

    Added BH Board (PN A-1071-980-A) PWB (Replaced Page 82 with Page 82) Added alternate BH Board PN to Exploded View section (Replaced Page 91 with Page 91) New CRTs & Shades introduced for KDP-51WS655 Affects SNs 8,500,001 and up Updated PN for Blue Shade and Lens for KDP-57WS655...
  • Page 2 Self Diagnosis Supported model AX-1X SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KDP-51WS655 RM-Y915 US/HAWAII SCC-M39A-A KDP-57WS655 RM-Y915 US/HAWAII SCC-M39B-A RM-Y915 KDP-51WS655 COLOR REAR VIDEO PROJECTION 9-965-970-03...
  • Page 3: Table Of Contents

    KDP-51WS655/57WS655 TABLE OF CONTENTS SECTION TITLE PAGE SECTION TITLE PAGE Specifi cations ................. 4 4-3. P & P Sub-Hue and Sub-Color Adjustment Video Warnings and Cautions ..............6 (SHUE, SCOL) ..............51 Safety Check-Out ................7 4-4. P & P Sub-Hue and Sub-Color Adjustment (RF) (SHUE, SCOL) ..............
  • Page 4: Specifi Cations

    Inc. and are licensed by BBE Sound, Inc. under U.S. CineMotion, Memory Stick, Memory Stick Duo, Patent No. 4,638,258 and 4,482,866. Memory Stick PRO, Memory Stick PRO Duo, MagicGate, MID and Twin View are trademarks of Sony Manufactured under license from Corporation. Dolby Laboratories Licensing Corporation.
  • Page 5 KDP-51WS655/57WS655 Projection System Screen Size (measured diagonally) 3 picture tubes, 3 lenses, horizontal in-line system 51 inches (KDP-51WS655) 57 inches (KDP-57WS655) Picture Tube Supplied Accessories 7-inch high-brightness monochrome tubes (6.3 raster size), with optical coupling and liquid cooling system. Remote Control RM-Y915...
  • Page 6: Warnings And Cautions

    Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi...
  • Page 7: Safety Check-Out

    KDP-51WS655/57WS655 SAFETY CHECK-OUT Leakage Test After correcting the original service problem, perform the following The AC leakage from any exposed metal part to earth ground and from safety checks before releasing the set to the customer: all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes).
  • Page 8: Self-Diagnostic Function

    KDP-51WS655/57WS655 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY/TIMER LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 9 KDP-51WS655/57WS655 Display of Standby/Timer LED Flash Count TIMER Indicator STAND BY Indicator Diagnostic items Flash count +B Overcurrent 2 times Low +B Overvoltage 3 times Vert. Deflection Stopped 4 times White Balance Failure 5 times Low +B OCP/OVP 6 times Horiz.
  • Page 10 KDP-51WS655/57WS655 Self-Diagnosis Function Operation +B overcurrent (OCP) Occurs when excessive current fl ows through R6812. The increase in voltage across Q6803 causes it to turn on which sends a high signal to the micro. +B overvoltage (OVP) IC6801 detects +B OVP condition and turns on Q6802. This sends a high signal to the micro and also shuts down the AC relay.
  • Page 11: Section 1: Disassembly

    KDP-51WS655/57WS655 SECTION 1: DISASSEMBLY 1-1. REAR BOARD REMOVAL Rear board 13 Screws (KDP-51WS655 Only) 12 Screws (KDP-57WS655 Only) Dome Washer Hex Tap 4 x 20 1-2. CHASSIS ASSEMBLY REMOVAL Three screws Dome Washer (Hex Tap 4 x 20) Chassis assy...
  • Page 12: Service Position

    KDP-51WS655/57WS655 1-3. SERVICE POSITION Free wiring from purse locks. NOTE: Observe wire dress and return to original condition. Covers Remove covers from chassis assembly with pliers when checking printed circuit boards. After checking, turn the covers over and re-secure them with the screws.
  • Page 13: Bh Board Removal

    KDP-51WS655/57WS655 1-5. BH BOARD REMOVAL Pry apart shield to remove BM board BM board Pull gently back on clips to release Main bracket 1-6. A BOARD, D BOARD, AND G BOARD REMOVAL Four screws (+BVTP 3x12) Seven screws (+BVTP 3x12)
  • Page 14: High-Voltage Cable Installation And Removal

    KDP-51WS655/57WS655 1-7. HIGH-VOLTAGE CABLE INSTALLATION AND REMOVAL (1) Removal (2) Installation Gutter Rubber cap HV cable Hook HV cable turn 90 1-8. PICTURE TUBE REMOVAL CAUTION: Removing the arrow-marked screws is strictly prohibited. If removed, it may cause liquid to spill.
  • Page 15: Speaker Grille, Ha2 Board, And Hb3 Board Removal

    KDP-51WS655/57WS655 1-9. SPEAKER GRILLE, HA2 BOARD, AND HB3 BOARD REMOVAL HB3 board 6 Two screws (+BVTP 3x12) Input Terminal Plate Input Terminal Bracket Four screws Dome Washer Hex Tap 4 x 20 Input Terminal Cover Two screws (+BVTP 3x12) The Speaker Grille Assy...
  • Page 16: Beznet Assembly Removal

    KDP-51WS655/57WS655 1-10.BEZNET ASSEMBLY REMOVAL Nine screws Dome Washer Hex Tap 4x20 Beznet assy Four screws Dome Washer Hex Tap 4x20 -2 per side Four screws Dome Washer Hex Tap 4x20 Four screws Dome Washer Hex Tap 4x20 -2 per side 1-10-1.SCREEN TAPE METHOD...
  • Page 17: Sr Board Removal

    KDP-51WS655/57WS655 1-11. SR BOARD REMOVAL The Screen Holder does not need to be removed in order to remove the SR boards. Sensor bracket (A) Sensor bracket (B) One screw SR board (+BVTP 4x12) Claws Four screws (+BVTP 4x12) L screen...
  • Page 18: Wire Dressing

    KDP-51WS655/57WS655 WIRE DRESSING KDP-51WS655/57WS655...
  • Page 19 KDP-51WS655/57WS655 KDP-51WS655/57WS655...
  • Page 20 KDP-51WS655/57WS655 KDP-51WS655/57WS655...
  • Page 21 KDP-51WS655/57WS655 KDP-51WS655/57WS655...
  • Page 22: Section 2: Set-Up Adjustments

    KDP-51WS655/57WS655 SECTION 2: SET-UP ADJUSTMENTS 2-3. DEFLECTION YOKE TILT ADJUSTMENT 2-1. SCREEN VOLTAGE ADJUSTMENT (G2) (COARSE ADJUSTMENT) 1. Connect the color bar generator monoscope pattern to Video 1 input. 2. Cover the red and blue CRT lenses with lens caps to allow only green 1.
  • Page 23: Focus Lens Adjustment

    KDP-51WS655/57WS655 2-4. FOCUS LENS ADJUSTMENT 2-5. FOCUS VR ADJUSTMENT In this adjustment, use the remote commander while in service mode. 1. Set generator to crosshatch. For details on the usage of the service mode and the remote commander, 2. Cover the red and blue CRT lenses with lens caps to allow only green...
  • Page 24: Centering Magnet Adjustment

    KDP-57WS655 to a round shape X:Y=1:1 centering magnet. b. KDP-51WS655 to an oval shape X:Y=1.2:1 6. Repeat steps 1 through 4 for the blue CRT except now you will cover 7. Repeat steps 1 through 6 for the red CRT except now you will cover...
  • Page 25: Electrical Adjustments By Remote Commander

    KDP-51WS655/57WS655 2-10. ELECTRICAL ADJUSTMENTS BY 7. If you want to go back to the most recently saved value, press “0” then “ENTER” to read the memory. REMOTE COMMANDER 8. Press “MUTING” then “ENTER” to write the new adjustment data into memory.
  • Page 26: Adjustable Service Data Lists

    Only the Adjustable registers are shown in this data list. A complete set of the AX1X Digital service data, Fixed and Adjustable, can be downloaded at: http://www-ec.sdp.sel.sony.com/padics/Model_Data_List.htm Only Sony authorized Service Technician can access this site. SERVICE DATA (dec) CATEGORY...
  • Page 27 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION R0GH Ratio Offset S0 G H (common) -128 R0RH Ratio Offset S0 R H (common) -128 R0BH Ratio Offset S0 B H (common) -128 R1GH Ratio Offset S1 G H (common) -128...
  • Page 28 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION CENT R H Cent Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 R V Cent Full / Normal -512 Zoom -512...
  • Page 29 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION CENT B H Cent Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 B V Cent Full / Normal -512 Zoom -512...
  • Page 30 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION SIZE G H Size Full / Normal -120 -120 -512 Zoom -120 -120 -512 WideZoom -120 -120 -512 1080i Full / Normal -120 -120 -512 1080i Zoom -120 -120 -512 1080i WideZoom...
  • Page 31 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION R H Lin Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 R V Lin Full / Normal -512 Zoom -512 WideZoom...
  • Page 32 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION B H Lin Full / Normal -300 -300 -512 Zoom -300 -300 -512 WideZoom -300 -300 -512 1080i Full / Normal -300 -300 -512 1080i Zoom -300 -300 -512 1080i WideZoom -300...
  • Page 33 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION SKEW G H Skew Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 G V Skew Full / Normal -512 Zoom -512...
  • Page 34 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION R H Bow Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 R V Bow Full / Normal -512 Zoom -512 WideZoom...
  • Page 35 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION B H Bow Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 B V Bow Full / Normal -512 Zoom -512 WideZoom...
  • Page 36 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION G H Key Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 G V Key Full / Normal -512 Zoom -512 WideZoom...
  • Page 37 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION R H Pin Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 R V Pin Full / Normal -512 Zoom -512 WideZoom...
  • Page 38 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION B H Pin Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 B V Pin Full / Normal -512 Zoom -512 WideZoom...
  • Page 39 KDP-51WS655/57WS655 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION MLIN B H Middle Lin Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 MSIZ R H Middle Size Full / Normal...
  • Page 40: Id Map Table

    KDP-51WS655/57WS655 2-11-1. ID MAP TABLE SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION ID Byte 0 (common) ID Byte 1 (common) ID Byte 2 (common) ID Byte 3 (common) ID Byte 4 (common) ID Byte 5 (common) ID Byte 6 (common)
  • Page 41: Registration Adjustment (Pje Mode Only)

    KDP-51WS655/57WS655 2-12.REGISTRATION ADJUSTMENT 2-12-1. SETUP FOR ADJUSTMENT (PJE MODE ONLY) MARKING • At the 4 sides of the screen, locate the middle. Use a tape measure to *ADJUSTING FLOW identify the middle. START Turn on the power and wait for 10 minutes.
  • Page 42: Operation Method For Projector Engine Mode

    KDP-51WS655/57WS655 2-12-3. OPERATION METHOD FOR Press Switches marker moving method. PROJECTOR ENGINE MODE Joystick (In Fine Adjustment mode) Pressing down on the joystick in Fine Adjustment mode switches DISPLAY between selecting and un-selecting a point. When a point is selected, the cursor changes to that color to indicate...
  • Page 43: Pje Adjustment (Sub Defl Ection Adjustment)

    KDP-51WS655/57WS655 3. OPERATION METHOD FOR FINE ADJUSTMENT 2-13.PJE ADJUSTMENT (SUB DEFLECTION 1. Enter the service mode and select “PJE”. ADJUSTMENT) 2. Select FDIS and set the data to “01” so that the data at each position can be displayed in fi ne adjustment mode.
  • Page 44: Adjustment For Ntsc Full Mode

    KDP-51WS655/57WS655 2-13-1. ADJUSTMENT FOR NTSC FULL MODE GRN SIZE (Horizontally/Vertically) Push the joystick Push the joystick • The adjustment should be done in the numerical order given. 1) GREEN ADJUSTMENT 1. Cover the red and blue CRT lenses with lens caps to allow only green to show (or use the method shown in the note below for turning off the CRTs individually without using lens caps).
  • Page 45 KDP-51WS655/57WS655 10. Select “GRN MSIZ”, and correct the space intervals for the horizontal 14. Press the “9” button on the remote commander to enter fi ne section so the screen is equal. adjustment mode. 15. Make the fi ne adjustment so that horizontal lines and vertical lines become straight.
  • Page 46: Copying All Registration Data To Other Modes

    KDP-51WS655/57WS655 2-14.AUTO REGISTRATION OFFSETS 4) REGISTRATION DATA WRITING IMPORTANT 1. After completing each adjustment of green, blue, and red for the This adjustment must be performed after registration adjustment NTSC Full mode press the “MUTING”+ “ENTER” buttons in PJE or after readjustment for any reason! service mode on the remote commander to write the registration data to the NVM.
  • Page 47: Auto Registration Error Codes

    KDP-51WS655/57WS655 2-15.AUTO REGISTRATION ERROR CODES If an error code is displayed after the set has been correctly adjusted, check the following items: position, tilt and sizing. If any of these adjustments are off, even slightly, the auto-registration pattern will not hit the four sensors properly. This occurs when the internal generator patterns are being fl...
  • Page 48: Auto Registration Diagnostics

    KDP-51WS655/57WS655 SENSOR POSITIONS • ERROR CODE SCREEN DISPLAY In service mode, the error will be displayed in text format. Error codes in normal (customer) mode are not displayed. You must enter PJE service mode to see the error code. ERROR B...
  • Page 49: Section 3: Safety-Related Adjustments

    KDP-51WS655/57WS655 SECTION 3: SAFETY-RELATED ADJUSTMENTS D BOARD 3-2. HV HOLD DOWN CIRCUIT OPERATION CHECK 3-1. HV REGULATION CIRCUIT CHECK AND When replacing the following components marked with a on the ADJUSTMENT schematic diagram always check the hold-down operation. When replacing the following components marked with a...
  • Page 50: G Board

    KDP-51WS655/57WS655 G BOARD 3-3. +B MAX VOLTAGE CONFIRMATION The following adjustments should always be performed when replacing IC6503 R6590. 1. Supply 130VAC to variable autotransformer. 2. Receive dot signal pattern and set the PICTURE and BRIGHTNESS settings to their minimum.
  • Page 51: Section 4: Circuit Adjustments

    KDP-51WS655/57WS655 SECTION 4: CIRCUIT ADJUSTMENTS 4-1. P & P SUB CONTRAST ADJUSTMENT 4-3. P & P SUB-HUE AND SUB-COLOR (VIDEO) (SCON) ADJUSTMENT VIDEO (SHUE, SCOL) 1. Receive the signal. 1. Receive the signal. VIDEO 1 terminal Composite: Color-bar VIDEO 1 terminal Composite: Color-bar (white-75%, 7.5% setup)
  • Page 52: Blue Offset Adjustment

    KDP-51WS655/57WS655 4-5. BLUE OFFSET ADJUSTMENT 1. Receive the all black (1080i, component) signal with VIDEO 5 input, and set PICTURE to maximum. 2. Connect an oscilloscope between CN5 7 pin (B) on the (A Board) and ground. 3. Set in the service mode and select the category “DEF2-SLIN”.
  • Page 53: Section 5: Diagrams

    KDP-51WS655/57WS655 SECTION 5: DIAGRAMS 5-1. CIRCUIT BOARDS LOCATION Q BOX ASSY 5-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS INFORMATION All capacitors are in µF unless otherwise noted. pF : µµF 50WV or less The components identifi ed by shading and symbol are critical for safety.
  • Page 54 KDP-51WS655/57WS655 Circled numbers are waveform references. The components identifi ed by in this basic schematic diagram have been carefully factory-selected for each set in order to satisfy regulations regarding X-ray radiation. Should replacement be necessary, replace only with the value Terminal name of semiconductors in silk screen originally used.
  • Page 55: Block Diagrams

    KDP-51WS655/57WS655 5-3. BLOCK DIAGRAMS POWER BLOCK DIAGRAM CRT 31.5KV I HOP 3.3V Reg Master micro STBY Audio Amp -22V AC Rect AC IN AC IN Rect Rect DC-DC Power Main 3.3V Supply Power PRI VCC PRI VCC Supply -5V Reg...
  • Page 56: Audio Signal Path Block Diagram

    KDP-51WS655/57WS655 AUDIO SIGNAL PATH BLOCK DIAGRAM MICRO MAIN TUNER TUNER VIDEO 1 VIDEO 2 16 / 17 VIDEO 3 IC 603 IC601 CXA2188Q NJW1148 TDA7490 PWM OUPUT AUDIO AUDIO FILTER VIDEO 4 SWITCH PROCESSOR VIDEO 5 VIDEO 6 VIDEO 7...
  • Page 57: Video Path Block Diagram

    KDP-51WS655/57WS655 $76& 9LGHR 3DWK VIDEO PATH BLOCK DIAGRAM  < <  G% $WW  &9 6XE &9<  <   < ,& 176&  &9 3E   3E &;'4 3U   3U &   &...
  • Page 58: Sync/Osd Path Block Diagram

    KDP-51WS655/57WS655 $76& 6\QF26' 3DWK 6\QF 3DWK SYNC/OSD PATH BLOCK DIAGRAM 26' 3DWK 6XE <  < IURP VXE FRPE 6XE & ,&  & +6   +6 ,& IURP VXE FRPE &;$$4 96  96   96 3) 0LFUR 6XE &...
  • Page 59: Schematics And Supporting Information

    KDP-51WS655/57WS655 5-4. SCHEMATICS AND SUPPORTING INFORMATION CR BOARD SCHEMATIC DIAGRAM CR BOARD WAVEFORMS 2.4 Vp-p (H) 101 Vp-p (H) TO F.BLOCK — CN9110 F GND R CRT DRIVE J9101 :FASTON TO F.BLOCK CHASSIS_GND CN9107 R9104 CN9104 :ONE TOUCH 560k 1/2W...
  • Page 60: Cb Board Schematic Diagram

    KDP-51WS655/57WS655 CB BOARD SCHEMATIC DIAGRAM CB BOARD WAVEFORMS CN9305 G2_MUTE 85.7 Vp-p (H) R5575 470k 2.0Vp-p (H) 1/2W +15V R5576 R5580 Q5520 — FB5206 1/10W 1/10W 2SC4634LS-YB11 1.1UH :CHIP :CHIP G2-STOP TO_F.BLOCK TO F.BLOCK D5520 PDZ11B-115 J9301 F GND C5550 0.001...
  • Page 61: Cg Board Schematic Diagram

    KDP-51WS655/57WS655 CG BOARD SCHEMATIC DIAGRAM CG BOARD WAVEFORMS TO F.BLOCK TO F.BLOCK CN9209 G CRT DRIVE 99.5 Vp-p (H) F GND 2.1 Vp-p (H) :ONE TOUCH J9201 SG9203 R9202 CN9201 560k — :S-MICRO 1/2W C9216 TO CR:CN9101 0.0022 CN9210 NL9202...
  • Page 62 KDP-51WS655/57WS655 [R CRT DRIVE] [B CRT DRIVE] [G CRT DRIVE] COMPONENT SIDE KDP-51WS655/57WS655...
  • Page 63 KDP-51WS655/57WS655 [R CRT DRIVE] [B CRT DRIVE] [G CRT DRIVE] CONDUCTOR SIDE KDP-51WS655/57WS655...
  • Page 64: Vm Board Schematic Diagram

    KDP-51WS655/57WS655 VM BOARD SCHEMATIC DIAGRAM [VELOCITY MODULATION] COMPONENT SIDE VELOCITY MODULATION D:CN5019 CN9001 CN9003 R9001 :S-MICRO :B TO B-P — 1/4W FB9001 +135V :FPRD MPZ2012S331 TO :VM COIL +135V +135V C9004 C9006 VM COIL ASSY 0.0047 160V 500V C9002 C9001...
  • Page 65: A Board Schematic Diagram (1 Of 6)

    KDP-51WS655/57WS655 A BOARD SCHEMATIC DIAGRAM (1 OF 6) A BOARD WAVEFORMS TO P BOARD :S-MICRO CN30 CN9504 TO QBOX :TAB — 2.2 Vp-p (H) MAIN YPBPR (P3-10J) FA421(10) TO P.3 R116 R122 R125 (P1-8B) (P1-5B) (P1-7D) 470p 1/10W 1/10W 1/10W...
  • Page 66: A Board Schematic Diagram (2 Of 6)

    KDP-51WS655/57WS655 A BOARD SCHEMATIC DIAGRAM (2 OF 6) L302 SUB_OSD (P5-15F) :GLF2012 TO P.5 (P1-8B) (P1-5B) (P1-7D) — SUB_OSD_RGB (P1-9B) (P1-11E) (P6-12L) (P5-5C) FB305 (P5-3F) SUB_OSD_YS (P5-11K) BLM11A601S (P5-14C) Q313 :1608 (P5-10K) C336 (P3-6D) SUB_CV/YC (P3-8J) C304 MSD601 (P1-6E) R308...
  • Page 67: A Board Schematic Diagram (3 Of 6)

    KDP-51WS655/57WS655 A BOARD SCHEMATIC DIAGRAM (3 OF 6) A BOARD WAVEFORMS :BTOB :BTOB TO D: CN5004 TO D: CN5005 — 3.0 Vp-p (V) 2.3 Vp-p (V). 2.4 Vp-p (H) TO CR:CN9103 DEFLECTION_2 (P3-3G) — D470 TO CG:CN9205 DEFLECTION_1 MMDL914T1 (P3-4E)
  • Page 68: A Board Schematic Diagram (4 Of 6)

    KDP-51WS655/57WS655 A BOARD SCHEMATIC DIAGRAM (4 OF 6) — HEATSINK OF IC601 IC601 TDA7490 AUDIO-22V AUDIO C692 0.01 F:1608 — C613 C646 560p 560p SL:1608 C634 C638 SL:1608 C648 0.001 R616 F:1608 F:1608 R646 100V R652 CH:1608 1/10W :CHIP C631...
  • Page 69: A Board Schematic Diagram (5 Of 6)

    KDP-51WS655/57WS655 A BOARD SCHEMATIC DIAGRAM (5 OF 6) CN17 CN15 :S-MICRO CN18 CN16 TO P BOARD :S-MICRO CN26 TO ANT SW :S-MICRO CN9504 TO HA2 CN1201 :S-MICRO — (P1-8B) (P1-10H) (P1-10K) (P1-12B) R802 (P1-6F) (P1-14C) (P3-6G) (P3-15F) :1608 (P3-5G) (P3-12K)
  • Page 70: A Board Schematic Diagram (6 Of 6)

    KDP-51WS655/57WS655 A BOARD SCHEMATIC DIAGRAM (6 OF 6) A BOARD WAVEFORMS C868 C870 R864 R872 +3.3V R913 2.1 Vp-p (V) 2.3 Vp-p (V) 2.1 Vp-p (V) 1/10W 1/10W B:1608 R917 C859 :RN-CP :RN-CP +3.3V 1/10W 1000p :CHIP 1/10W — :CHIP...
  • Page 71 KDP-51WS655/57WS655 A BOARD IC VOLTAGE LIST 11.0 -5.0 VOLT IC601 IC701 VOLT VOLT VOLT -22.00 -22.00 IC862 VOLT 22.1 -5.0 IC703 IC852 VOLT VOLT IC857 15.0 -5.0 IC302 VOLT VOLT 15.0 IC704 All voltages are in V. VOLT -20.7 15.0 -5.0...
  • Page 72 KDP-51WS655/57WS655 A BOARD TRANSISTOR VOLTAGE LIST A BOARD LOCATOR LIST CONDUCTOR SIDE A BOARD LOCATOR LIST COMPONENT SIDE DIODE TRANSISTOR DIODE TRANSISTOR TRANSISTOR E-13 E-11 F-12 Q485 Q324 Q485 IC302 H-13 Q703 C-10 E-12 C-11 F-12 Q486 Q486 Q325 IC303...
  • Page 73 KDP-51WS655/57WS655 [TERMINAL BLOCK, TUNER SUB COMB/ENCODER, POWER REGS, CRT DRIVE, AUDIO AMP, AUDIO PROCESSOR MICRO, DREGI-3, PJED3-CPU] COMPONENT SIDE KDP-51WS655/57WS655...
  • Page 74 KDP-51WS655/57WS655 [TERMINAL BLOCK, TUNER SUB COMB/ENCODER, POWER REGS, CRT DRIVE, AUDIO AMP, AUDIO PROCESSOR MICRO, DREGI-3, PJED3-CPU] CONDUCTOR SIDE KDP-51WS655/57WS655...
  • Page 75: D Board Schematic Diagram (1 Of 2)

    KDP-51WS655/57WS655 D BOARD SCHEMATIC DIAGRAM (1 OF 2) D BOARD IC VOLTAGE LIST IC5101 IC6400 IC6503 IC8002 IC8005 IC9401 R5415 VOLT VOLT VOLT VOLT VOLT VOLT C5410 0.001 200V 134.0 R5243 15.0 1/10W R5247 R6612 :CHIP 4.7k T5002 0.47 1/10W...
  • Page 76: D Board Schematic Diagram (2 Of 2)

    KDP-51WS655/57WS655 D BOARD SCHEMATIC DIAGRAM (2 OF 2) D BOARD W AVEFORMS +135V R8166 MAIN Q8003 1/10W MSD601RT1 :CHIP FB8002 FB8003 HV-PROT 0.45UH 0.45UH C8037 T8001 0.056 RHT(NX-6030) D8038 IC8002 800V MM3Z15VT1 D8024 MCZ3001DB Q8014 FB8001 :MPP R8056 0.45UH MM3Z5V1ST1...
  • Page 77 KDP-51WS655/57WS655 D BOARD LOCATOR LIST CONDUCTOR SIDE DIODE DIODE TRANSISTOR D5003 D8010 Q5001 D-10 F-10 D5005 D8011 Q5004 E-10 D-10 D5101 D8012 Q5005 D-10 D5102 D8015 Q5006 C-10 E-11 D5201 D8019 Q5008 A-10 D-10 D5202 D8022 Q5009 C-11 D5203 D8023...
  • Page 78 KDP-51WS655/57WS655 [H/V DRIVE, H/V DY, DYNAMIC FOCUS, POWER SUPPLY, AC RECT] COMPONENT SIDE KDP-51WS655/57WS655...
  • Page 79 KDP-51WS655/57WS655 [H/V DRIVE, H/V DY, DYNAMIC FOCUS, POWER SUPPLY, AC RECT] CONDUCTOR SIDE KDP-51WS655/57WS655...
  • Page 80: Bh Board Schematic Diagram (1 Of 2)

    KDP-51WS655/57WS655 BH BOARD SCHEMATIC DIAGRAM (1 OF 2) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.
  • Page 81: Bh Board Schematic Diagram (2 Of 2)

    KDP-51WS655/57WS655 BH BOARD SCHEMATIC DIAGRAM (2 OF 2) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.
  • Page 82 KDP-51WS655/57WS655 NOTE: THE BH BOARDS ARE MANUFACTURED AT DIFFERENT FACILITIES. EITHER BOARD CAN BE USED AS A REPLACEMENT. [A/D, HELIOS] (A-1071-980-A) [A/D, HELIOS] (A-1071-980-A) [A/D, HELIOS] (PN A-1111-561-A) COMPONENT SIDE CONDUCTOR SIDE COMPONENT SIDE [A/D, HELIOS] (PN A-1111-561-A) CONDUCTOR SIDE...
  • Page 83: G Board Schematic Diagram

    KDP-51WS655/57WS655 G BOARD SCHEMATIC DIAGRAM G BOARD IC VOLTAGE LIST IC6100 IC6901 VOLT VOLT CN6901 TO D (CN6401) — IC6900 IC6902 PRIVCC VOLT VOLT RECT + T6900 (R6012) L6900 L6002 :LHL08 IC6902 RECT+ PQ05RD1B C6900 C6919 L6902 5V REG FB6901 All voltages are in V.
  • Page 84 KDP-51WS655/57WS655 [POWER SUPPLY, AC RECT] COMPONENT SIDE KDP-51WS655/57WS655...
  • Page 85 KDP-51WS655/57WS655 [POWER SUPPLY, AC RECT] CONDUCTOR SIDE KDP-51WS655/57WS655...
  • Page 86: Ha2 Board Schematic Diagram

    KDP-51WS655/57WS655 HA2 BOARD SCHEMATIC DIAGRAM [KEY INPUT, LED, SIRCS] COMPONENT SIDE IC1201 SBX3071-71 TO A: CN15 STBY C1201 D1201 R1201 SLR-325VCT31 CN1201 1/10W WHT-L :CHIP :S-MICRO TIMER — D1203 D1202 UDZSTE-1710B R1202 R1203 R1204 R1205 STBY 5V 2.2k SLR-325VCT31 1/10W...
  • Page 87: P Board Schematic Diagram

    KDP-51WS655/57WS655 P BOARD SCHEMATIC DIAGRAM Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. P BOARD WAVEFORMS...
  • Page 88: Sr Board Schematic Diagram

    KDP-51WS655/57WS655 SR BOARD SCHEMATIC DIAGRAM Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. CN9901...
  • Page 89 KDP-51WS655/57WS655 [FRONT TERMINAL] [FRONT TERMINAL] COMPONENT SIDE CONDUCTOR SIDE CN1101 VIDEO J1101 1-863-604-11 A-1059- 471-A KDP-51WS655/57WS655...
  • Page 90: Section 6: Exploded Views

    SCREW, DOME WASHER HEX TAP 4X20 (KDP-57WS655 ONLY) 2-023-092-01 HOLDER (R), MIRROR SIDE 2-103-258-01 BUTTON ASSY (KDP-51WS655 ONLY) 2-102-900-01 GUIDE (QH), LED 4-083-461-01 HOLDER (R), MIRROR SIDE A-1303-030-A QH BOARD, COMPLETE (KDP-57WS655 ONLY) 3-704-179-01 EMBLEM (NO. 9), SONY (KDP-51WS655 ONLY) KDP-51WS655/57WS655...
  • Page 91: Chassis

    KDP-51WS655/57WS655 NOTE: The components identifi ed by shading and mark are critical for safety. NOTE: Les composants identifi es per un trame et une marque sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifi e.
  • Page 92: Picture Tube

    DESCRIPTION REF.NO. PART NO. DESCRIPTION A-1054-147-A CB BOARD, MOUNTED 4-096-119-02 SHADE (51-G) A-1054-148-A CG BOARD, MOUNTED (KDP-51WS655 SERIAL # 8,500,001 AND UP ONLY) 6-3. PICTURE TUBE A-1054-146-A CR BOARD, MOUNTED 4-101-291-02 SHADE (G) A-1405-662-A VM BOARD, MOUNTED (KDP-57WS655 ONLY) 7-685-648-79...
  • Page 93: Section 7: Electrical Parts List

    KDP-51WS655/57WS655 SECTION 7: ELECTRICAL PARTS LIST NOTE: The components identifi ed by shading The components in this manual identifi ed by the following RESISTORS mark are critical for safety. Replace only • All resistors are in ohms symbol: indicate parts that have been carefully factory- with part number specifi...
  • Page 94 KDP-51WS655/57WS655 CR CB NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 95 KDP-51WS655/57WS655 CB CG NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 96 KDP-51WS655/57WS655 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 97 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES Q9006 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q9007 8-729-422-27 TRANSISTOR 2SD601A-Q Q9008 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX A-1405-662-A VM BOARD, MOUNTED Q9009 8-729-422-27 TRANSISTOR 2SD601A-Q 4-382-854-11 SCREW (M3X10), P, SW (+) Q9010...
  • Page 98 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES 1-126-925-91 ELECT 470µF 1-126-947-11 ELECT 47µF 1-126-967-11 ELECT 47µF 1-126-933-11 ELECT 100µF A-1065-547-A A BOARD, COMPLETE 1-164-315-11 CERAMIC CHIP 470pF 4-382-854-11 SCREW (M3X10), P, SW (+) 1-164-315-11...
  • Page 99 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C112 1-117-720-11 CERAMIC CHIP 4.7µF C343 1-126-926-11 ELECT 1000µF C113 1-117-720-11 CERAMIC CHIP 4.7µF C344 1-126-935-11 ELECT 470µF C114 1-126-960-11 ELECT 1µF C345 1-164-156-11 CERAMIC CHIP 0.1µF...
  • Page 100 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C435 1-162-970-11 CERAMIC CHIP 0.01µF C497 1-126-963-11 ELECT 4.7µF C436 1-162-927-11 CERAMIC CHIP 100pF C501 1-107-826-11 CERAMIC CHIP 0.1µF C437 1-162-927-11 CERAMIC CHIP 100pF C502 1-107-826-11 CERAMIC CHIP 0.1µF...
  • Page 101 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C625 1-164-315-11 CERAMIC CHIP 470pF C671 1-136-153-00 FILM 0.01µF C626 1-107-826-11 CERAMIC CHIP 0.1µF C672 1-165-908-11 CERAMIC CHIP 1µF C628 1-162-966-11 CERAMIC CHIP 0.0022µF 10% C673 1-137-190-91 FILM 0.22µF...
  • Page 102 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C725 1-162-919-11 CERAMIC CHIP 22pF C870 1-126-933-11 ELECT 100µF C726 1-164-156-11 CERAMIC CHIP 0.1µF C871 1-107-826-11 CERAMIC CHIP 0.1µF C727 1-162-918-11 CERAMIC CHIP 18pF C872 1-107-826-11 CERAMIC CHIP 0.1µF...
  • Page 103 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C917 1-162-925-11 CERAMIC CHIP 68pF CN21 1-785-532-11 PIN, CONNECTOR (PC BOARD) C918 1-162-925-11 CERAMIC CHIP 68pF CN22 1-785-530-11 PIN, CONNECTOR (PC BOARD) C919 1-162-925-11 CERAMIC CHIP 68pF...
  • Page 104 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES 8-719-977-28 DIODE DTZ10B D856 8-719-081-97 DIODE MMDL914T1 8-719-977-28 DIODE DTZ10B D857 8-719-081-97 DIODE MMDL914T1 8-719-977-28 DIODE DTZ10B D858 8-719-081-97 DIODE MMDL914T1 8-719-081-97 DIODE MMDL914T1 8-719-081-97 DIODE MMDL914T1...
  • Page 105 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES FB876 1-414-445-11 FERRITE 0µH IC857 6-704-067-01 M24128-BWMN6T(A) FB877 1-414-445-11 FERRITE 0µH IC858 8-759-352-91 PST9143NL FB878 1-414-445-11 FERRITE 0µH IC859 8-759-700-65 NJM79L05A FB879 1-414-445-11 FERRITE 0µH IC860 8-759-830-08...
  • Page 106 KDP-51WS655/57WS655 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 107 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES Q481 8-729-010-25 TRANSISTOR MSD601-RT1 RESISTOR Q482 8-729-010-25 TRANSISTOR MSD601-RT1 1-216-829-11 METAL CHIP 4.7K 1/10W Q483 8-729-010-25 TRANSISTOR MSD601-RT1 1-216-833-11 METAL CHIP 1/10W Q484 8-729-010-25 TRANSISTOR MSD601-RT1 1-216-833-11...
  • Page 108 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES 1-216-825-11 METAL CHIP 2.2K 1/10W R136 1-216-809-11 METAL CHIP 1/10W 1-216-829-11 METAL CHIP 4.7K 1/10W R137 1-216-817-11 METAL CHIP 1/10W 1-216-829-11 METAL CHIP 4.7K 1/10W R138 1-216-809-11...
  • Page 109 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R183 1-216-817-11 METAL CHIP 1/10W R238 1-216-837-11 METAL CHIP 1/10W R184 1-216-853-11 METAL CHIP 470K 1/10W R239 1-216-836-11 METAL CHIP 1/10W R185 1-216-853-11 METAL CHIP 470K 1/10W...
  • Page 110 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R372 1-216-809-11 METAL CHIP 1/10W R480 1-216-825-11 METAL CHIP 2.2K 1/10W R373 1-216-817-11 METAL CHIP 1/10W R481 1-216-809-11 METAL CHIP 1/10W R374 1-216-817-11 METAL CHIP 1/10W R482...
  • Page 111 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R531 1-216-833-11 METAL CHIP 1/10W R583 1-216-821-11 METAL CHIP 1/10W R532 1-216-809-11 METAL CHIP 1/10W R584 1-216-821-11 METAL CHIP 1/10W R533 1-216-825-11 METAL CHIP 2.2K 1/10W R585...
  • Page 112 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R659 1-216-809-11 METAL CHIP 1/10W R735 1-216-809-11 METAL CHIP 1/10W R660 1-218-871-11 METAL CHIP 0.50% 1/10W R737 1-216-816-11 METAL CHIP 1/10W R661 1-216-835-11 METAL CHIP 1/10W R738...
  • Page 113 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R783 1-216-833-11 METAL CHIP 1/10W R851 1-216-821-11 METAL CHIP 1/10W R784 1-216-833-11 METAL CHIP 1/10W R852 1-218-863-11 METAL CHIP 4.7K 0.50% 1/10W R785 1-216-841-11 METAL CHIP 1/10W...
  • Page 114 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R895 1-216-833-11 METAL CHIP 1/10W R939 1-218-883-11 METAL CHIP 0.50% 1/10W R896 1-216-825-11 METAL CHIP 2.2K 1/10W R940 1-218-886-11 METAL CHIP 0.50% 1/10W R897 1-216-818-11 METAL CHIP...
  • Page 115 KDP-51WS655/57WS655 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 116 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C6601 1-104-666-11 ELECT 220µF C8073 1-164-315-11 CERAMIC CHIP 470pF C6602 1-100-566-91 CERAMIC CHIP 0.1µF C8074 1-162-970-11 CERAMIC CHIP 0.01µF C6603 1-162-969-11 CERAMIC CHIP 0.0068µF 10% C8075 1-162-970-11 CERAMIC CHIP 0.01µF...
  • Page 117 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES CN6400 1-580-843-11 PIN, CONNECTOR (POWER) D8001 8-719-081-97 DIODE MMDL914T1 CN6401 1-764-101-11 PIN, CONNECTOR (PC BOARD) D8003 8-719-081-97 DIODE MMDL914T1 CN9405 1-564-507-11 PLUG, CONNECTOR D8005 8-719-081-97 DIODE MMDL914T1...
  • Page 118 KDP-51WS655/57WS655 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 119 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES Q5202 8-729-010-25 TRANSISTOR MSD601-RT1 R5101 1-216-845-11 METAL CHIP 100K 1/10W Q5203 8-729-010-25 TRANSISTOR MSD601-RT1 R5102 1-216-841-11 METAL CHIP 1/10W Q5521 8-729-010-05 TRANSISTOR MSB709-RT1 R5103 1-216-833-11 METAL CHIP...
  • Page 120 KDP-51WS655/57WS655 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 121 KDP-51WS655/57WS655 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 122 KDP-51WS655/57WS655 A component identifi ed by this symbol indicates that it NOTE: The components identifi ed by shading has been carefully factory-selected to satisfy regulations mark are critical for safety. Replace only regarding X-ray radiation. Should replacement be required, with part number specifi ed.
  • Page 123 KDP-51WS655/57WS655 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 124 KDP-51WS655/57WS655 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 125 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C9530 1-126-394-11 ELECT CHIP 10µF C9826 1-162-919-11 CERAMIC CHIP 22pF C9531 1-126-394-11 ELECT CHIP 10µF C9828 1-126-394-11 ELECT CHIP 10µF C9532 1-126-394-11 ELECT CHIP 10µF C9830 1-100-566-91 CERAMIC CHIP 0.1µF...
  • Page 126 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R9509 1-216-857-11 METAL CHIP 1/10W R9510 1-218-665-11 METAL CHIP 0.50% 1/10W IC9500 6-706-257-01 FMS6418AM16X R9511 1-216-803-11 METAL CHIP 1/10W IC9502 6-704-819-01 CS4335-KSZR R9512 1-218-665-11 METAL CHIP 0.50% 1/10W...
  • Page 127 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R9572 1-216-837-11 METAL CHIP 1/10W R9891 1-216-809-11 METAL CHIP 1/10W R9574 1-216-809-11 METAL CHIP 1/10W R9575 1-216-809-11 METAL CHIP 1/10W RESISTOR BRIDGE R9576 1-216-857-11 METAL CHIP 1/10W...
  • Page 128 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C3112 1-162-970-11 CERAMIC CHIP 0.01µF C3156 1-107-826-11 CERAMIC CHIP 0.1µF C3113 1-137-710-11 CERAMIC CHIP 10µF 6.3V C3157 1-137-710-11 CERAMIC CHIP 10µF 6.3V C3114 1-107-826-11 CERAMIC CHIP 0.1µF...
  • Page 129 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C3335 1-162-970-11 CERAMIC CHIP 0.01µF C3383 1-162-970-11 CERAMIC CHIP 0.01µF C3337 1-107-826-11 CERAMIC CHIP 0.1µF C3384 1-107-826-11 CERAMIC CHIP 0.1µF C3338 1-162-970-11 CERAMIC CHIP 0.01µF C3385 1-126-205-11 ELECT CHIP 47µF...
  • Page 130 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES RESISTOR IC3101 8-752-425-02 CXD3802BQ R3024 1-216-827-11 METAL CHIP 3.3K 1/10W IC3102 6-705-983-01 IS42S32200B-6TL-TR R3035 1-543-949-22 FERRITE 0µH IC3103 6-706-706-01 SN10503PWPR R3036 1-543-949-22 FERRITE 0µH IC3105 8-759-833-72 NJM2870F25-TE2...
  • Page 131 KDP-51WS655/57WS655 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R3143 1-218-847-11 METAL CHIP 0.50% 1/10W R3369 1-216-813-11 METAL CHIP 1/10W R3144 1-218-849-11 METAL CHIP 1.2K 0.50% 1/10W R3370 1-216-851-11 METAL CHIP 330K 1/10W R3145 1-218-849-11 METAL CHIP 1.2K...
  • Page 132 KDP-51WS655/57WS655 QH HA2 SR REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES RB3305 1-239-409-11 NETWORK RESISTOR(CHIP) RESISTOR RB3306 1-239-409-11 NETWORK RESISTOR(CHIP) R1201 1-216-809-11 METAL CHIP 1/10W RB3309 1-239-409-11 NETWORK RESISTOR(CHIP) R1202 1-216-817-11 METAL CHIP 1/10W RB3310...
  • Page 133 TAPE, ACETATE (P2412) 25X30M A-1059-471-A HB3 BOARD, MOUNTED 7-600-019-13 TAPE,ACETATE(P2412HD) 25MMX30M ACCESSORIES AND PACKING CAPACITOR 4-041-426-01 BAG, PROTECTION C1100 1-126-960-11 ELECT 1µF (KDP-51WS655 ONLY) C1101 1-126-960-11 ELECT 1µF 4-076-420-01 BAG, PROTECTION (KDP-57WS655 ONLY) CONNECTOR 2-159-717-01 CARTON, INDIVIDUAL (KDP-51WS655 ONLY) CN1101...
  • Page 134 In an effort to reduce the size of this pdf fi le the tiled schematics are not attached to this Service Manual. To receive a complete set of the tiled schematics for this manual please submit a request to Service_Promotion@am.sony.com.

This manual is also suitable for:

Kdp-57ws655

Table of Contents