Call Forward (Busy) - Cisco 7905 Reference Manual

To enable/Modify Call forwarding from a
Remote location
Dial the number for Remote Access to
•
Call Forwarding or dial your phone number and
press * at the message
Enter your complete telephone number + #. If your
•
phone is configured as an extension-only (i.e.,
non-DID) line, enter your organization's complete
main telephone number + * + your extension
number + #.
Enter your telephone password + #
•
Enter the new forwarding number + #. For
•
external numbers use the Outside Access Digit,
usually 9.
After hearing the verification, hang up
•
To Disable Call forwarding using the Menu
Press the CFwdAll softkey
•
Press the EndCall softkey
•
To Disable Call forwarding using star Codes
Lift the handset and dial 73*
•
After hearing the verification, hang up
•
To Disable Call forwarding from a
Remote location
Dial the number for Remote Access to Call
•
Forwarding or dial your phone number and press
* at the message
Enter your complete telephone number + #
•
Enter your telephone password + #
•
Press ##
•
After hearing the verification, hang up
•

Call foRWaRD (bUsY)

Call Forward (Busy) forwards calls to another number
when you are already on a call.
To enable/Modify Call forward (busy)
Lift the handset and dial 76*
•
Enter the extension or phone number for the
•
forwarding destination followed by #. For external
numbers, use the Outside Access Digit.
6