Download  Print this page
   

Advertisement

2-50 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Pump [A] the piston rod [B] slowly several times to expel
air.
Replace the O-rings [A] on the base valve assembly with
new ones.
Apply specified fork oil to the O-rings [A] [B] and bushings
[C] on the base valve assembly.
With the piston rod held immovable in fully compressed
position [A], gently install the base valve assembly [B] to
the subtank.
Screw in the base valve assembly in the subtank when
the piston rod extends.
When it is hard to screw in the base valve assembly,
pull down the piston rod a little.
Holding the top plug wrench [A] with a vise.
Special Tool - Top Plug Wrench, 49 mm: 57001-1653
Holding the subtank [B] with the top plug wrench, torque
the base valve assembly [C].
Torque - Base Valve Assembly: 28 N·m (2.9 kgf·m, 21 ft·lb)
NOTE

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f