2-28 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Remove the Oil Filter [A].
Install the spring [A] to the right engine cover.
Apply grease to the grommet [B].
Be sure to install the filter with the grommet facing outside
Inside out installation stop oil flow, causing engine
Replace the oil filter cover O-ring [A] with a new one.
Replace the oil filter with a new one.
Apply grease to the O-rings.
Install the oil filter cover.
Torque - Oil Filter Cover Bolt: 9.8 N·m (1.0 kgf·m, 87 in·lb)
Pour in the specified type and amount of oil (see Engine
Breather Hose Inspection
Be certain that the breather hose are routed without being
flattened or kinked and is connected correctly.
If it is not, correct it.
Inspect the breather hose [A] for damage or sings of de-
This hose should not be hard and brittle, nor should be
Replace it if any cracks or swelling is noticed.