Number Plate [A]
Clutch Holder [B]
Engine Stop Switch [C]
Left Handlebar Grip [E]
Throttle Grip Assy [A] (see Throttle Cable Replacement
in the Fuel System chapter)
Master Cylinder [B] (see Front Master Cylinder Removal
in the Brakes chapter)
Handlebar Holder Bolts [A]
Handlebar Holder (Upper)[B]
Apply adhesive cement to the inside of the left handlebar
Install the left handlebar grip so that the arrow [A] on the
grip face to the forward.
Install the clutch lever [A] so that it incline 20° ±5° [B] more
than the horizontal line [C] and position it from the edge
of the grip to 170 mm (6.69 in.) [D].