Download  Print this page

Tie-rod, Rocker Arm; Tie-rod Removal; Tie-rod Installation; Rocker Arm Removal - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

Tie-Rod, Rocker Arm

Tie-Rod Removal

Using the jack under the frame, raise the rear wheel off
the ground.
Special Tool - Jack: 57001-1238
Unscrew the nut [A] and remove the guide roller [B].
When pulling out the mounting bolts, lift the rear
wheel slightly. Forcing or tapping on a bolt could
damage the bolt, sleeve, and bearing.
Remove the tie-rod rear mounting bolt [A].
Remove the tie-rod front mounting bolt [B], and then take
off the tie-rod [C].

Tie-Rod Installation

Apply plenty of grease to the inside of the oil seals.
Tighten the tie-rod front and rear mounting nuts.
Torque - Tie-Rod Mounting Nuts: 83 N·m (8.5 kgf·m, 61
ft·lb) (KX450D6F)
Tie-Rod Mounting Nuts: 59 N·m (6.0 kgf·m, 43 ft·lb
(KX450D7F ∼)

Rocker Arm Removal

Using the jack under the frame, raise the rear wheel off
the ground.
Special Tool - Jack: 57001-1238
When pulling out the mounting bolts, lift the rear
wheel slightly. Forcing or tapping on bolt could
damage the bolt, sleeve, and bearing.
Remove the rear shock absorber lower mounting bolt [A].
Remove the tie-rod rear mounting bolt [B].
Remove the rocker arm pivot bolt [C].
Remove the rocker arm [D].
CAUTION
CAUTION
SUSPENSION 13-49

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f