Download  Print this page

Swingarm Bearing, Sleeve Inspection; Drive Chain Guide, Guide Roller, Chain Slipper Wear Inspection - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

13-48 SUSPENSION
Swingarm

Swingarm Bearing, Sleeve Inspection

Do not remove the bearings for inspection. Re-
moval may damage them.
Inspect the needle bearings installed in the swingarm.
The rollers in a bearing normally wear very little, and wear
is difficult to measure. Instead of measuring, visually
inspect the bearing for abrasion, discoloration, or other
damage.
If the needle bearing, and sleeve show any sings of ab-
normal wear, discoloration, or damage, replace them as
a set.
Drive Chain Guide, Guide Roller, Chain Slipper Wear
Inspection
Visually inspect the drive chain guide [A] and replace it if
excessively worn or damaged.
Visually inspect the upper and lower chain guide rollers
[A] and replace them if excessively worn or damaged.
Visually inspect the chain slipper [A] on the swingarm [B]
and replace it if worn or damaged.
CAUTION

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f