Download  Print this page


Periodic Maintenance Procedures
Apply grease to all connections and screw holes in the air
cleaner housing and intake tract.
Install the element onto its frame, and coat the element
lip and lip seat with a thick layer of all-purpose grease to
assure a complete seal.
Install the air cleaner element so that its tab faces [A]
upward and its projections [B] align with the holes [C] in
the housing.
Tighten the wing bolt [D]
Install the seat (see Seat Installation in the Frame chap-

Fuel System Cleaning

Gasoline is extremely flammable and can be ex-
plosive under certain conditions. Always stop the
engine and do not smoke. Make sure the area is
well-ventilated and free from any source of flame
or sparks; this includes any appliance with a pilot
Turn the fuel tap to the OFF position.
Remove the carburetor (see Carburetor Removal in the
Fuel System chapter).
Place a suitable container beneath the carburetor.
Remove the drain plug [A] from the bottom of the float
bowl and check for water or dirt in the fuel.
If any water or dirt comes out, clean the carburetor, fuel
filter, fuel tap and fuel tank.
Install the drain plug on the float bowl, and tighten it se-
Install the carburetor (see Carburetor Installation in the
Fuel System chapter).


Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f