Place the jack [A] under the frame so that the rear wheel
is off the ground.
Special Tool - Jack: 57001-1238
Rear Wheel (see Rear Wheel Removal in the
Brake Pedal [C] (see Brake Pedal Removal in the Brakes
Disc Protector [D]
Bolts [A] and Nuts [B]
Chain Guide Plate [C]
Chain Guide [D]
Unscrew the rocker arm pivot nut [A] and pull out the
rocker arm pivot bolt [B].
When pulling out the mounting bolts, lift the
swingarm slightly. Forcing or tapping on a bolt
could damage the bolt, sleeve, and bearing.
Unscrew the nut [A].
Pull out the swingarm pivot shaft [B], and remove the