Download  Print this page
   

Advertisement

Front Fork (KX450D8F)
Holding the top plug wrench (57001-1653) [A] with a vise.
Holding the subtank [B] with the top plug wrench, torque
the base valve assembly [C] using the top plug wrench
(57001-1705) [D].
Special Tool - Top Plug Wrench, 49 mm: 57001-1653
Top Plug Wrench, 36 mm: 57001-1705
Torque - Base Valve Assembly: 28 N·m (2.9 kgf·m, 21 ft·lb)
Protect the piston rod end [A] with a rag [B] to prevent fork
damage.
Discharge the extra oil off the cylinder unit by pumping [C]
the piston rod to full stroke.
Be careful not to bend or damage the piston rod
when the piston rod is stroked. Service carefully
because oil flies out from the oil hole of the cylinder
unit.
Set the compression damper setting to the softest.
Check the piston rod sliding surface for damage.
Apply fork oil to the piston rod sliding surface.
Drain the extra oil from the subtank oil hole [A].
With the cylinder unit in horizontal position, move [A] the
piston rod [B] by hand to inspect it if operating smoothly.
If the piston rod is not extend, remove the base valve
assembly and perform the air bleeding (pour the specified
amount fork oil and discharge an excess of oil).
CAUTION
NOTE
SUSPENSION 13-35

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f