Download  Print this page
   

Advertisement

13-30 SUSPENSION
Front Fork (KX450D8F)
Place a drain pan under the front fork and drain fork oil
[A].
Pump the fork tube several times to discharge the fork
oil.
Raise the outer tube and temporarily install the fork top
plug [A] (subtank) to the outer tube [B] with the top plug
wrench [C].
Special Tool - Top Plug Wrench, 49 mm: 57001-1653
Hold the axle holder [A] with a vise.
Protect the axle holder with a rag when using a vise.
Loosen the adjuster assembly [B] completely.
Clamping the axle holder too tight can damage it
which will affect riding stability.
Do not clamp the axle holder too tight.
Compress the outer tube by hands and install the top plug
wrench [A] between the axle holder bottom [B] and locknut
[C].
Special Tool - Top Plug Wrench, 49 mm: 57001-1653
Be careful of reaction force in spring and fix surely
so that the special tool should not come off. Do not
place the finger etc. while servicing.
Hold the locknut [A] with a wrench [B] and remove the
adjuster assembly [C].
NOTE
WARNING
WARNING

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f