Download  Print this page


Front Fork (KX450D8F)
Front Fork Disassembly (each fork leg)
Loosen the front fork upper clamp bolts [A].
Loosen the fork top plug (subtank) [A] with the top plug
wrench [B].
Special Tool - Top Plug Wrench, 49 mm: 57001-1653 [B]
Remove the front fork (see Front Fork Removal).
Set rebound and compression damping setting to the
softest settings before disassembling to prevent the
needle of adjusters from damaging. Record the setting
before turning the adjuster.
Thoroughly clean the fork before disassembly.
Be careful not scratch the inner tube and not to
damage the dust seal.
Avoid scratching or damaging the inner tube or the
dust seal. Use a mild detergent and sponge out dirt
with plenty of water.
Using the top plug wrench [A], remove the fork top plug
[B] (subtank) from the outer tube and slowly slide down
the outer tube [C].
Special Tool - Top Plug Wrench, 49 mm: 57001-1653


Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f