Download  Print this page
   

Advertisement

13-28 SUSPENSION
Front Fork (KX450D8F)
Loosen the upper [A], and lower [B] fork clamp bolts.
Remove the front fork.
With a twisting motion [A], work the fork leg [B] down and
out.
Front Fork Installation
Install the fork so that the distance between the top end of
the outer tube and the upper surface of the steering stem
head is specified dimension.
[A] 8 mm (0.31 in.)
Route the cables and hose according to the Cable, Wire,
and , Hose Routing section in the Appendix chapter.
Install the front wheel (see Front Wheel Installation in the
Wheels/Tires chapter).
Tighten the fork clamp bolts.
Torque - Front Fork Clamp Bolts (Upper): 20 N·m (2.0
kgf·m, 15 ft·lb)
Front Fork Clamp Bolts (Lower): 20 N·m (2.0
kgf·m, 15 ft·lb)
Tighten the two clamp bolts alternately two times to en-
sure even tightening torque.
Tighten:
Torque - Front Caliper Mounting Bolts: 25 N·m (2.5 kgf·m,
18 ft·lb)
Check the front brake operation after installation.
NOTE

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f