Download  Print this page

Cylinder Unit Inspection; Inner Tube Inspection; Guide Bush Inspection; Dust Seal/oil Seal Inspection - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

13-24 SUSPENSION
Front Fork (KX450D6F ∼ D7F)

Cylinder Unit Inspection

Inspect the piston rod [B] of cylinder unit [A] for scratches
or bending.
If it has scratches or is bent, replace cylinder unit with a
new one.

Inner Tube Inspection

Visually inspect the inner tube [A], repair any damage.
Nick or rust damage can sometimes be repaired by using
a wet-stone to remove sharp edges or raised areas which
cause seal damage.
If the damage is not repairable, replace the inner tube.
Since damage to the inner tube damages the oil seal,
replace the oil seal whenever the inner tube is repaired
or replaced.
Temporarily assemble the inner [A] and outer tubes [B],
and pump them back and forth manually to check for
smooth operation.
If the inner tube is badly bent or creased, replace
it.
Excessive bending, followed by subsequent
straightening, can weaken the inner tube.

Guide Bush Inspection

Visually inspect the guide bushes [A], and replace them if
necessary.

Dust Seal/Oil Seal Inspection

Inspect the dust seal [A] for any signs of deterioration or
damage.
Replace it if necessary.
Replace the oil seal [B] with a new one whenever it has
been removed.
CAUTION

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f