Front Fork (KX450D6F ∼ D7F)
With the piston rod in fully compressed position, pour the
specified amount of fork oil [A].
Plug the two oil holes on the subtank [B] with fingers.
Pump [A] the piston rod [B] slowly several times to expel
Replace the O-rings [A] on the base valve assembly with
Apply specified fork oil to the O-rings [A] [B] and bushings
[C] on the base valve assembly.
With the piston rod held immovable in fully compressed
position [A], gently install the base valve assembly [B] to
Screw in the base valve assembly in the subtank when
the piston rod extends.
When it is hard to screw in the base valve assembly,
pull down the piston rod a little.
KHL15-10 (KAYABA01) or
170 ml (5.75 US oz) (KX450D6F)
191 ml (6.46 US oz) (KX450D7F)