Download  Print this page

Brake Pad Removal; Brake Pad Installation; Brake Pad Inspection - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

Brake Pad

Brake Pad Removal

For Front Brake Pad
Unscrew the pad bolt [A].
Take the piston side pad [B].
Push the caliper holder toward the piston, and then re-
move another pad [C] from the caliper holder.
For Rear Brake Pad
Remove:
Plug [A]
Unscrew the pad bolt [A].
Take the piston side pad [B].
Push the caliper hold toward the piston, and then remove
another pad [C] from the caliper holder.

Brake Pad Installation

Push the caliper pistons in by hand as far as they will go.
Install the piston side pad first, and then another pad.
Fit the pad end [A] into the groove [B] of the anti-rattle
spring securely.
Tighten the brake pad bolt.
Torque - Brake Pad Bolt: 17 N·m (1.7 kgf·m, 13 ft·lb)
Rear Brake Pad Bolt Plug: 2.5 N·m (0.25 kgf·m, 22
in·lb)
Check the brake for good braking power, no brake drag,
and no fluid leakage.
Do not attempt to drive the motorcycle until a full
brake lever or pedal is obtained by pumping the
brake lever or pedal until the pads are against the
disc. The brake will not function on the first appli-
cation of the lever or pedal if this is not done.

Brake Pad Inspection

Refer to the Brake Pad Wear Inspection in the Periodic
Maintenance chapter.
WARNING
BRAKES 12-15

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f