Download  Print this page

Sprockets; Engine Sprocket Removal; Engine Sprocket Installation; Rear Sprocket Removal - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

Sprockets

Engine Sprocket Removal

Remove:
Engine Sprocket Cover Bolts [A]
Engine Sprocket Cover [B]
Drive Chain Guide [C]
Remove:
Drive Chain [B] (free of engine sprocket)
Flatten the bended sprocket washer [A].
Remove the engine sprocket nut [C] and sprocket washer,
and pull off the engine sprocket [D].

Engine Sprocket Installation

Install the engine sprocket so that the flatten side faces
[A] inside.
Replace the sprocket washer with a new one.
Install the sprocket washer and sprocket nut.
Torque - Engine Sprocket Nut: 127 N·m (13 kgf·m, 94 ft·lb)
Bend the one side of the sprocket washer on the nut.
Install the engine sprocket cover.
Torque - Engine Sprocket Cover Bolts : 9.8 N·m (1.0 kgf·m,
87 in·lb)

Rear Sprocket Removal

Remove the rear wheel (see Rear wheel Removal in the
Wheels/Tires chapter).
Do not lay the wheel on the ground with the disc
facing down. This can damage or warp the disc.
Place blocks under the wheel so that the disc does
not touch the ground.
Unscrew the rear sprocket bolts [A], and remove the rear
sprocket [B].
CAUTION
FINAL DRIVE 11-7

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f