Download  Print this page

Balancer; Balancer Removal; Balancer Installation - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

Balancer

Balancer Removal

Remove:
Right Engine Cover (see Right Engine Cover Removal
in the Engine Right Side chapter)
Magneto Cover (see Magneto Cover Removal in the
Electrical System chapter)
Flywheel (see Flywheel Removal in the Electrical Sys-
tem chapter)
Balancer Weight Mounting Nut [A]
Balancer Weight [B]
Balancer Gear [C]
Pull out the balancer shaft from the right crankcase half.

Balancer Installation

Insert the balancer shaft from the right crankcase half.
Install the balancer gear so that the stepped portion [A]
on the balancer shaft and punch mark [B] on the balancer
gear align.
Align the punch mark [A] on the balancer drive gear and
punch mark [B] on the balancer gear.
Install the balancer weight so that the punch mark [A] on
the balancer and punch mark [B] on the balancer gear.
Tighten:
Torque - Balancer Weight Mounting Nut: 52 N·m (5.3 kgf·m,
38 ft·lb)
CRANKSHAFT/TRANSMISSION 9-23

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f