8-8 ENGINE REMOVAL/INSTALLATION
Install the removed parts (see Appropriate chapter).
Run the cables, hoses, and leads according to the Cable,
Wire and Hose Routing section in the Appendix chapter.
Engine Oil (see Engine Oil Change in the Periodic Main-
Coolant (see Coolant Draining in the Cooling System
Throttle Cable (see Throttle Grip (Throttle Cable) Free
Play Adjustment in the Periodic Maintenance chapter)
Clutch Cable (see Clutch Lever (Clutch Cable) Free Play
Adjustment in the Periodic Maintenance chapter)
Drive Chain (see Drive Chain Slack Adjustment in the
Periodic Maintenance chapter)
Adjust the idling (see Idle Speed Adjustment in the Peri-
odic Maintenance chapter).
Check the operation of the clutch lever.
Check the brake effectiveness.
Do no attempt to drive the motorcycle until you
pump the brake pedal until the pads are against
the disc. The brake will not function on the first
application of the pedal if this is not done.