Download  Print this page

Oil Pressure; Oil Pressure Measurement - Kawasaki KX450F Service Manual

Hide thumbs



Oil Pressure

Oil Pressure Measurement

Remove the oil filter cover [A].
Install the O-rings to the oil pressure cap.
Special Tool - Oil Pressure Cap: 57001–1656
Install the oil pressure cap.
Attach the oil pressure gauge adapter [A] and oil pressure
gauge [B].
Special Tools - Oil Pressure Gauge Adapter, M10 × 1.0:
Oil Pressure Gauge, 5 kgf/cm²: 57001-125
Start the engine and warm up the engine thoroughly.
Run the engine at the specified speed, and read the oil
pressure gauge.
If the oil pressure is much lower than the standard, check
the feed oil pump.
If the reading is much higher than the standard, check the
oil filter first, and oil passages for dirt or clogging.
Oil Pump Pressure (oil temperature 90°C, @4 000 rpm)
Standard: 39 ∼ 98 kPa (0.4 ∼ 1.0 kgf/cm², 5.6 ∼ 14 psi)
Warm up the engine thoroughly before measuring the
oil pressure.
Stop the engine and remove the oil pressure cap, oil pres-
sure gauge adapter and gauge.
Take care against burns from hot engine oil that will
drain through the oil passage when the oil pressure
gauge adapter is removed.
Install the oil filter cover.
Torque - Oil Filter Cover Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)


Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f