Download  Print this page

Oil Screen (feed) Cleaning - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

Engine Oil and Oil Filter
Check the screen [A] carefully for any damage, holes,
broken wires gasket pulling off.
If the screen is damaged, replace it.
Install the oil screen (see Oil Screen (Scavenge) Installa-
tion).

Oil Screen (Feed) Cleaning

Remove the oil screen (see Oil Screen (Feed) Removal)
Clean the oil screen with a high-flash point solvent and
remove the particles stuck.
Blow away the particles by applying compressed air [A]
from the inside to the outside (from the clean side to the
dirty side).
Clean the screen in a well-ventilated area, and take
care that there is no spark or flame anywhere near
the working area. Because of the danger of highly
flammable liquids, do not use gasoline or low-flash
point solvents.
While cleaning the screens, check for any metal parti-
cles that might indicate internal engine damage.
Check the screens carefully for any damage: holes and
broken wires.
If the screen is damaged, replace the oil screen.
WARNING
NOTE
ENGINE LUBRICATION SYSTEM 7-11

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f