Download  Print this page

Oil Filter Change; Oil Screen (scavenge) Removal; Oil Screen (scavenge) Installation - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

Engine Oil and Oil Filter

Oil Filter Change

Refer to the Oil Filter Change in the Periodic Maintenance
chapter.

Oil Screen (Scavenge) Removal

Remove the oil pump (scavenge) cover (see Oil Pump
(Scavenge) Cover Removal).
Pull out the oil screen [A] from the crankcase.

Oil Screen (Scavenge) Installation

Clean the oil screens thoroughly whenever it is removed
for any reason.
Clean the oil screens with a high-flash point solvent and
remove any particles stuck to them.
Clean the screen in a well-ventilated area, and take
care that there is no spark or flame anywhere near
the working area. Because of the danger of highly
flammable liquids, do not use gasoline or low-flash
point solvents.
While cleaning the screens, check for any metal parti-
cles that might indicate internal engine damage.
Check the screens [A] carefully for any damage, holes,
broken wires, gasket pulling off.
If the screen is damaged, replace it.
Apply engine oil to the rubber portion [A] on the oil screen.
Install the oil screen facing the carved line [B] to the out-
side.
Install the oil pump (scavenge) cover.
WARNING
NOTE
ENGINE LUBRICATION SYSTEM 7-9

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f