Kick Shaft Assembly Disassembly/Assembly
The kick shaft assembly consists of the following parts.
[A] Kick Gear
Check the kick shaft assembly parts for damage.
Any damaged parts should be replaced with new ones.
Apply molybdenum disulfide grease to the inside of the
kick gear and ratchet gear.
Apply grease to the inside of the spring guide.
When assembling the ratchet gear [A] onto the kick shaft
[B], align the punch mark [C] on the ratchet gear with the
punch mark [C] on the kick shaft.
Replace the circlips that were removed with new ones.
Special Tool - Outside Circlip Pliers: 57001-144
[E] Ratchet Gear
[F] Kick Shaft
[G] Kick Spring
[H] Spring Guide
ENGINE RIGHT SIDE 6-23