Download  Print this page

Primary Gear; Primary Gear Removal; Primary Gear Installation - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

Primary Gear

Primary Gear Removal

Remove:
Right Engine Cover
Clutch (see Clutch Removal)
Temporarily install the clutch housing [A].
Using the gear holder [B], secure the primary gear.
Special Tool - Gear Holder, m2.0: 57001-1557
Remove the clutch housing.
Remove the primary gear nut [C], washer, primary gear
[D] and oil pump drive gear.
Primary gear nut is left-hand threads.

Primary Gear Installation

Apply high-temperature grease to the oil seal lip.
Insert the oil pump drive gear [A] and primary gear [B] to
the crankshaft.
Install the washer [C] as shown.
Temporarily install the clutch housing.
Using the gear holder [A], secure the clutch gear and the
bottom of the primary gear; then, tighten the primary gear
nut [B].
Primary gear nut is left-hand threads.
Torque - Primary Gear Nut: 98 N·m (10 kgf·m, 72 ft·lb)
Special Tool - Gear Holder, m2.0: 57001-1557
Install:
Clutch (see Clutch Installation)
Right Engine Cover (see Right Engine Cover Installa-
tion)
ENGINE RIGHT SIDE 6-17

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f