Download  Print this page
   

Advertisement

6-14 ENGINE RIGHT SIDE
Clutch
Tighten:
Torque - Clutch Spring Bolts [A]: 8.8 N·m (0.90 kgf·m, 78
in·lb)
Install the clutch cover (see Clutch Cover Installation).
Check the release shaft lever positions.
Pushing [B] the release shaft lever [C] lightly frontward
measure the distance [A] between the lever and cable
bracket [D].
Release Shaft Lever Position
68.6 ∼ 76.4 mm (2.70 ∼ 3.01 in.)
Standard:
If the lever position is not within the standard, select the
correct thickness of adjusting washer(s) according to the
tables shown.
Adjusting Washers
Thickness
1.5 mm
1.0 mm
Release Shaft Lever Position and Adjusting Washer
Selection
Position Distance
68.6 mm to 76.4 mm
More than 76.4 mm
Less than 68.6 mm
Remove the push rod holder assy as necessary and re-
install the clutch.
Part Number
92200-1548
92200-0045
Washers
Judgment
Thickness
Standard
1.5 mm
Too big
1.0 mm
Too small
1.0 mm
Qty
1
1
2

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f