Download  Print this page
   

Advertisement

Clutch
Install the washer so that stamp mark [A] facing the out-
side.
Tighten the clutch hub nut [A] using the clutch holder [B].
Special Tool - Clutch Holder: 57001-1243
Torque - Clutch Hub Nut: 98 N·m (10 kgf·m, 72 ft·lb)
Install the friction plates and steel plates, starting with a
friction plate [A] and alternating them. Finishing with a
friction plate.
Install the friction plates which the lining blocks [B] on the
plates installed to both end are more than the one of the
other plates.
Apply engine oil to the new friction plates when it shall be
installed.
If dry steel plates and friction plates are installed,
apply engine oil to the surfaces of each plate to
avoid clutch plate seizure.
Apply molybdenum disulfide grease to the rubbing portion
[A] of the push rod holder.
Install the push rod [B] and push rod holder.
Apply molybdenum disulfide grease to the needle bearing
[C] and washer [D], and install them.
CAUTION
ENGINE RIGHT SIDE 6-13

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f