Download  Print this page
   

Advertisement

Camshaft
Engage the camshaft chain with the camshaft sprockets.
Pull the tension side (exhaust side) of the chain taut to
install the chain.
The timing marks on the sprocket must be aligned with
the cylinder head upper surface.
Pull the chain taut and fit it onto the camshaft sprocket.
Starting with the timing mark on the front of the exhaust
sprocket, count to the 1st pin. Feed the exhaust camshaft
thought the chain and align the 29th pin with the timing
mark on the inlet camshaft sprocket.
1st Pin [A]
2nd Pin [B]
29th Pin [C]
Plug the oil passage and camshaft chain tunnel with a
clean cloth for prevent the any parts from dropping in the
crankcase.
Be sure to install the positioning rings [A] and dowel pins
[B].
ENGINE TOP END 5-17
Mark (exhaust) [D]
Punch Mark (inlet) [E]
Upper Cylinder Head Surface [F]

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f