When installing the element, coat the lip of the element
with a thick layer of all purpose grease [A] to assure a
complete seal against the air cleaner element base. Also,
coat the base where the lip of the element fits.
Apply grease to all connections and screw holes in the air
cleaner housing and intake tract.
Take out the towel from the carburetor securely.
Install the element so that its tab [A] faces upward and fit
the frame projections [B] to the holes of the holder [C].
Tighten the wing bolt [D].
Install the seat (see Seat Installation in the Frame chap-
Element Cleaning and Inspection
Refer to the Air Cleaner Element Cleaning and Inspection
in the Periodic Maintenance chapter.
FUEL SYSTEM 3-29