Download  Print this page

Air Cleaner; Air Cleaner Housing Removal; Air Cleaner Housing Installation; Element Removal - Kawasaki KX450F Service Manual

Kx450f.
Hide thumbs
   

Advertisement

3-28 FUEL SYSTEM

Air Cleaner

Air Cleaner Housing Removal

Remove:
Side Covers (see Side Cover Removal in the Frame
chapter)
Seat (see Seat Removal in the Frame chapter)
Muffler (see Muffler Removal in the Engine Top End
chapter)
Rear Fender [A] (see Rear Fender Removal in the
Frame chapter)
Rear Frame Bolts [B]
Loosen the air cleaner duct clamp [C].
Remove the rear frame.
Unscrew the bolts [A].
Remove the air cleaner housing [B].

Air Cleaner Housing Installation

Installation is the reverse of the removal.
Tighten:
Torque - Air Cleaner Housing Bolts: 9.8 N·m (1.0 kgf·m, 87
in·lb)
Rear Frame Mounting Bolts: 34 N·m (3.5 kgf·m, 25
ft·lb)

Element Removal

Remove:
Seat (see Seat Removal in the Frame chapter)
Wing Bolt [A]
Element [B]
Stuff a clean, lint-free towel into the carburetor so no dirt
is allowed to enter the carburetor.
Wipe out the inside of the air cleaner housing with a clean
damp towel.
Check inside of the inlet tract and carburetor for
dirt. If dirt is present, clean the intake tract and car-
buretor thoroughly. You may also need to replace
the element and seal the housing and inlet tract.
CAUTION

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f