Download  Print this page
   

Advertisement

3-26 FUEL SYSTEM
Carburetor
Replace the O-ring with new one.
Install:
Pilot Air Screw [A]
Spring [B]
Washer [C]
O-ring [D]
Turn in the pilot air screw fully but not tightly, and the
back it out the counted number of turn (see Carburetor
Disassembly).
Hang the float valve [A] on the tang [B] of the float [C].
Fit the float valve into the valve seat.
Insert the pin [D].
Install:
Leak Jet [A]
Replace the O-ring with new one.
Fit the O-ring [B] onto the groove of the float chamber.
Install:
Float Bowl
Tighten the screws with hose clamps [A] and cable holder
[B] as shown.
Replace the O-rings with new ones.
Fit the O-rings [A].
Install:
Diaphragm [B]
Spring [C]
Acceleration Pump Cover
Install the diaphragm so that its mark facing [D] outward.
Tighten the bolts.

Advertisement

Table of Contents

   Also See for Kawasaki KX450F

This manual is also suitable for:

Kx450f 2006Kxf 450

Comments to this Manuals

Symbols: 0
Latest comments:
  • paulo sergio borges Apr 13, 2016 05:03:
    quantidade oleo suspencao kx 450 f