3-24 FUEL SYSTEM
Apply thin coat silicone grease to the shaft.
Fit the hook [A] of the return spring onto the stopper [B]
of the throttle cable pulley.
Insert the throttle cable pulley shaft [A] and install the steel
washer [B], nylon washer [C] and valve link [D].
Fit the end [A] of the return spring into the recess [B] of
the carburetor body.
Turn the pulley counterclockwise [A] while holding down
the acceleration pump lever [B] and clear the stopper [C]
of the pulley from the throttle stop screw head [D].
Install the push rod [A] into the push rod holder [B].