Sharp AH-A18LCA Operation Manual page 10

Operation of wireless remote control
Names and functions of wireless remote control
Notice: This is a general use remote controller, it could be used for various types
of the air conditioners with multifunction. For some functions, which the model
dosen't have, if press the corresponding button on the remote controller that the
unit will keep the original running status.
Remote control
SWING UP AND DOWN BUTTON
Press this button, to set up swing angle,
which circularly changes as below:
OFF
This is an universal use remote controller. If
remote controller sends the following three
kinds of status
swing status of main unit will be:
When the vertical louver starts to swing up
and down, if turn off the Swing, the air vertical
louver will stop at current position.
which indicates the vertical louver swings
up and down between that all five positions.
TIMER ON
TIMER ON BUTTON
Timer On setting: Signal "ON" will blink
and display, signal
numerical section will become the timer
on setting status. During 5 seconds blink,
by pressing
time value of numerical section, every
press of that button, the value will be
increased or decreased 1 minute. Hold
pressing
it quickly changes, the way of change is:
During the initial 2.5 seconds, change the
units digit of minute. Once the unit digit
is fixed, change the tens digit of minute
at 2.5 seconds speed and carry. During
5s blink, press the Timer On button again,
the timer setting succeeds. The Timer
On has been set up, repress the Timer
On button, the Timer On will be can-
celed. Before setting the Timer, please
adjust the Clock to the current actual
time.
TIMER OFF
TIMER OFF BUTTON
Once press this key to enter into
TIMER OFF setup, in which case
the TIMER OFF icon will blink.
The method of setting is the same
as TIMER ON function.
that the
will conceal, the
or button to adjust the
or button for 2 seconds,