Software - Silvercrest SPLK 200 A1 User Manual And Service Information

 Then press the security button [5] on the other PowerLAN Adapter for less
than 3 seconds.

Software

The software on the enclosed CD is not required for use. However, the software
can be used to configure certain settings: To use the software, it must be installed
as follows:
 Insert the supplied CD-ROM and the installation menu will open
automatically.
 Install the software (Power Packet Utility) according to the directions on the
screen.
If the setup wizard does not automatically start when the CD-ROM is inserted,
then the auto run function of your CD drive is deactivated. Then proceed as
follows:
 Click on the 'Start' button to open the Start Menu.
 Click on the option 'Run...'
 Insert the drive letter of your CD-ROM drive, followed by a colon and the
program name 'Autorun' (e.g. D:autorun).
 Click on the 'OK' button to confirm the action.
SilverCrest SPLK 200 A1
English - 39