Panasonic R410A Service Manual page 47

R410a inverter
Table of Contents

Advertisement

• If there are obstacles above the unit
① For separate installation location
• Only if there are obstacles at the intake
(B) If there are obstacles at the discharge
• If the upper part is open
• If there are obstacles above the unit
(C) If there are obstacles on both the intake and discharge
Pattern 1
If there is an obstacle that is higher than the unit on the intake side. (There is no limit to the height of the obstacle above
the discharge.)
• If the upper part is open
• If there are obstacles above the unit
① For separate installation location
• The dimensions for H, A and L are shown in the
following table.
L
0 < L 1/2 H
L H
1/2H < L H
H < L
Install a pedestal or mount so that L H
• Cover the bottom part of the pedestal or mount so that air
does not go through it.
• If there are obstacles on the intake and the other side
① For separate installation location
① For separate installation location
① For separate installation location
p
A
300
500
1-43
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents