Ending The Wireless Connection - Canon Powershot SD430 Digital ELPH Wireless User Manual

3
Select [Transfer] and press
If you have not selected the images for transfer order in advance,
specify the images with [Order] or [Mark all] and select [Transfer].
Transfer of images will begin. The wireless lamp and the
button will blink blue.
The transferring camera will display [Transferring] and the receiving
camera will display [Receiving]. When the transfer is complete, [Transfer completed] and
[File(s) received] will display.
If you wish to cancel the operation while transferring, press the FUNC./SET button while
[Transferring] is displayed on the screen.
If you have failed to receive, [File(s) not received] will be displayed. Press the FUNC./SET
button, and the screen will return to the previous screen.
It is not possible to transfer movies or sound memos.
Two cameras cannot transfer images at the same time (If one is transferring, the other
camera may only receive).
The camera receiving the images cannot cancel while receiving.
Received images will be stored at the end of all image files.

Ending the Wireless Connection

The wireless connection can be terminated by the following steps.
Ending from (Wireless) Menu (See below).
Turn off the power or switch over to Shooting Mode
End with
1
(Wireless) Menu
2
Make sure the name of the camera is displayed as [Target Device],
then select [Disconnect] and press
The wireless connection will end and [Disconnected] will appear
on the target camera screen. Press the FUNC./SET button and
the Playback screen will appear.
(Wireless) Menu
[Connect/Disconnect]
.
.
5