Digital-In Audio; Center Ch Input - JVC I'Art Palette LCT1648-001B-A User Manual

Digital-In Audio

This feature is used if you have a DTV or HDMI
compatible component connected to your TV.
Press the M
To DIGITAL-IN AUDIO
π †
è
To select ANALOG or DIGITAL
Press the Menu button when fi nished
Notes:
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component's instruction manual for more information.
• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page
76.

Center CH Input

When you are using a surround system, you can substitute the speaker of this television for
the center speaker of your surround system. Set CENTER CH INPUT to ON when you use the
speaker as the center speaker of your surround system. The volume differs when the TV is
being utilized as the Center Channel Input versus when it is not.
Press the M
To CENTER CH INPUT
π †
è
To adjust CENTER CH INPUT to ON or OFF
Press the M
Note:
• In order to use the CENTER CHANNEL SPEAKER feature, you need a video signal present
as well as sound. Because of that we recommend using this feature for Home Theater setup
only. If there is no video signal present, the TV will be muted.
• There are two different volume adjustment levels, one for regular TV and one for TV used as
a CENTER CHANNEL. Please remember that when switching CENTER CHANNEL mode ON
and OFF in TV menu.
button
ENU
button
ENU
button when finished
ENU
Initial Setup
INITIAL SETUP
PREVIOUS
VIDEO-1 MONITOR OUT
TV SPEAKER
AUDIO OUT
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
NEXT PAGE
SELECT OPERATE
INITIAL SETUP
PREVIOUS
VIDEO-1 MONITOR OUT
TV SPEAKER
AUDIO OUT
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
NEXT PAGE
SELECT OPERATE
OFF
ON
VARI
SIZE1
DIGITAL
ON
(1/5)
EXIT
MENU
OFF
ON
VARI
SIZE1
DIGITAL
ON
(1/5)
EXIT
MENU
57