Connecting The Tv And Receiver; Connecting The Power Cord To The Ac Outlet - JVC I'Art Palette LCT1648-001B-A User Manual

Quick Setup

Connecting the TV and Receiver

Use the supplied system cable to connect the TV to the receiver.
The two connectors are of different shapes. Ensure that the pins
on connector 1 are oriented correctly, press the connector into the
socket, and tighten the screws at left and right to lock it in place.
Press connector 2 firmly into place until it is locked.
Disconnecting the system cable
Release connector 1 by unscrewing the screws at left and
right and removing it from the socket. Release connector 2 by
removing it from the socket while pressing the release bottoms on
either side.

Connecting the power cord to the AC outlet

Insert the AC plugs on the power
cords from the TV and receiver into
AC outlets.
Caution
• Operate only from the power
source specified (AC 120V, 60 Hz)
on the unit.
• Failure to use the supplied power
cord or to insert it into a correctly
grounded outlet may result in
electric shocks.
Use the supplied power cord which best suits the area in which you live.
Insert the AC plug into a correctly grounded
outlet.
• Remove the AC plug from the outlet to
completely disconnect the TV from the power
supply.
14
Back of the TV
AC INLET
Power cord
OPTICAL OUT
CABLE CARD
IN/OUT
(TS)
Digital Audio
DISPLAY OUT (SYSTEMCABLE)
Manufactured under license from Dolby Laboratories.
"Dolby"and the double-D symbol are trademarks of Dolby Laboratories.
Getting Started
1
1
Power cord
AC INLET
SUB WOOFER
OUT
AUDIO L VIDEO
S-VIDEO
MONITOR / REC OUT
Back of the receiver
75Ω U.S. Patent Nos. 4,631,603; 4,577,216;
4,819,098; 4,907,093; and 6,516,132.
(VHF/UHF) CENTER
VIDEO AUDIO CHANNEL
DIGITAL DIGITAL ATSC/ INPUT
R L Pr Pb Y
DIGITAL CABLE IN DVI
ANALOG
AUDIO
IN
INPUT1
R AUDIO L VIDEO
Pr Pb Y
INPUT2
HDMI AV COMPULINK
INPUT3
R AUDIO L VIDEO R AUDIO L VIDEO
Receiver rear
2
2
AUDIO SUB WOOFER
OUT OUT
R AUDIO L VIDEO
S-VIDEO
MONITOR / REC OUT
S-
VIDEO
OVER
S-
VIDEO
OVER