NEC Mobile Phone User Manual page 41

Editing the mode settings
☛
▲ or 1 2 ➔ Highlight the required mode
For any volume setting, use ▲ ▼, Side keys or alphanumeric keys (0 to 9).
When you change any volume setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
No. Phone mode setting
1 Ringer
2 Ringer volume
3 SMS tone
4 SMS tone volume
5 Mail tone
6 Mail tone volume
7 Key tone
8 Service tone
9 Alarm volume
0 Vibrator
Earphone setting
26 Settings (M1)
➔ SK1 ➔ Press the appropriate number for the required setting in the following table.
Selects the Sound or Video for incoming calls. (See "Sounds (M62)" on page 69 or "Videos (M61)" on page 69 for details.)
If the Video is set, it will sound and will be displayed regardless of the CLI picture setting for the personal data in Phonebook.
(See "Allocating a picture as a CLI" on page 59.)
Sets the sound volume for incoming calls.
While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
While using a wired headset, you can set the volume for the wired headset. The volume settings for the wired headset and the
speaker of the phone are saved individually.
While using a Bluetooth headset and a Bluetooth hands-free kit, however, the volume setting for the speaker of the phone is
used.
Selects the ringtone for incoming SMS messages. (See "Sounds (M62)" on page 69 for details.)
Sets the sound volume for incoming SMS messages.
Selects the ringtone for incoming Mail or MMS messages. (See "Sounds (M62)" on page 69 for details.)
Sets the sound volume for incoming Mail or MMS messages.
Turns on/off the key tone.
Turns on/off the service tone.
Sets the sound volume for Clock alarm and Schedule alarm.
Turns on/off the vibrator function.
Selects the sound output from Earphone & Speaker or Earphone.
This option affects the wired headset.