Exiting Hot Water Programming Mode - Honeywell ST9400A User Manual

1 day programmer, 2 channel
Hide thumbs Also See for ST9400A:
Table of Contents

Advertisement

PROGRAMMING YOUR ST900A
Note: When pressing the
This indicates you have tried to set a time equal to one of the next programme times
already in the memory. Similarly, when pressing the
OFF marker may start to flash. This indicates you have tried to set a time equal to
one of the previous programme times. If this happens the ST9400A simply moves
both times together as long as you continue to press the
the procedure in 'Reviewing the Programme Times' (page 7) to check and adjust
these times as necessary.
c. 'SET OFF-TIME 1' will be displayed and the first OFF 1 time will now be flashing. If
you do not wish to change the time, press the green
step. Otherwise, use the
button to confirm the time is correct and move to the next step. 'SAVED' will be
displayed for a moment to confirm that any change has been saved to memory.
d. The remaining ON and OFF times (ON 2, OFF 2) can be set by using the
or
buttons to change the time, and the green
is correct and move to the next step. If you do not wish to change the time, just
press the green
making any changes.
e. After setting or reviewing the last off time, OFF 2, the message 'COMPLETE' will
be displayed to indicate the times have been set.

Exiting HOT WATER Programming Mode:

To exit HOT WATER programming mode, move the slider to the RUN position. This
can be done at any time during the programming process, and any changes made
and confirmed with the
Note: If the unit is left in HOT WATER Programming mode for more than 10 minutes without
the slider being moved or any buttons pressed, the message 'MOVE SLIDER' will be
displayed. Press a button to finish programming, or move the slider to the RUN position.

button the next ON or OFF marker may start to flash.
or
buttons to change the time. Press the green
button to move directly to the next ON/OFF time without
button will have been saved.
button the previous ON or
or
buttons. Follow
button and move to the next
button to confirm the time

Advertisement

Table of Contents
loading

Table of Contents