Download  Print this page

Install Batteries In Wireless Devices - Mitsubishi Electric MCCH1 Installation Manual

Portable central controller and outdoor air sensor
Hide thumbs

Advertisement

Installation Guide - Wireless Accessories

Install batteries in wireless devices

1
Make sure batteries are inserted properly (see polarity marks on illustrations
below).
Portable central controller
Link devices to wireless network
2
69-2428EFS—03
Install 3 fresh
AA batteries
M28475
Outdoor air sensor
1 Remove cover from wireless receiver.
2 Verify POWER light is solid green.
3 Press and release the
4 If CONNECT light does not flash, another receiver
or RedLINK wireless adapter may be in wireless
setup mode. Exit wireless setup at the other
device.
Flashing status light times out after 15
minutes of inactivity. Press
again if necessary.
2
Install 2 fresh AA
lithium
batteries
M28476
CONNECT
button.
CONNECT

Advertisement

loading

  Also See for Mitsubishi Electric MCCH1

  Related Manuals for Mitsubishi Electric MCCH1

This manual is also suitable for:

Mos1