Control With Hdmi; System Info; Auto Demo - JVC 1208TSH-II-IM User Manual

Customizing your TV

Control with HDMI

If you use a HDMI CEC compatible device, set this setting to "On".
HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI
CEC enabled devices with a single remote. CEC (Consumer Electronics Control) is an optional
protocol used in HDMI.
• HDMI CEC on this TV is compliant with "High-Definition Multimedia Interface Specification".
• The TV does not support HDMI CEC functions that are not listed below.
• The TV does not guarantee to support use of all HDMI CEC enabled devices.
• Devices that are not enabled to HDMI CEC cannot be controlled with this TV.
– Control the TV using the HDMI CEC enabled device –
• Turn the TV on and switch to the video source of the operating device.
• Switch to the video source of the operating device.
• Turn the TV off with the HDMI CEC enabled device you are viewing.
• For operating instructions of the device, refer to the device's manual.
– Control the HDMI CEC enabled device using the TV –
• Turn off the operating device by turning off the TV.
• Some device may not support this function. For more details refer to the device's manual.
– Send status of the TV to the HDMI CEC enabled device –
• When switching the TV's external input or channel.
• When switching the TV's menu language.
• Information regarding behavior of the device when status is received, refer to the external
device's manual.
If HDMI CEC does not work correctly:
• When HDMI CEC enabled device is connected to INPUT 1, INPUT 2 or INPUT 3 with an
HDMI cable, you may not be able to control TV's external input. To solve the problem set this
setting to "Off".

System Info

You can confirm the TV's software version.

Auto Demo

Auto Demo explains this TV's features to you.
Notes:
• The Auto Demo mode will start automatically when you set Retail in Initial Setup.
• If you press any button on the television or remote, with the exception of
POWER or MENU, the Auto Demo mode will stop for 30 seconds. After 30 seconds
have passed with no operation, the Auto Demo mode will start again.
• If you want to turn off the Auto Demo, press the MENU button.
42