Position Adjustment; Power Indicator; Video-1 Monitor Out - JVC 0505TNH-II-IM User Manual

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema, or full.
Press the M
To POSITION ADJUSTMENT
π †
è
To enter
è
To adjust the position
π †
Press the M
Notes:
• To reset the adjustment to the center, press the
O button.
K
• When the arrow disappears, while you are adjusting the position, the position is at it's
maximum limit.
• If you select regular size and slim size with aspect or Multi Screen, position adjustment
option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set PANORAMA ZOOM or CINEMA ZOOM for 1080i and 720p signals.

Power Indicator

Power indicator allows you to adjust the brightness of
the power indicator
Press the M
To POWER INDICATOR
π †
è
To adjust POWER INDICATOR LOW, HIGH
or OFF
Note:
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.

Video-1 Monitor Out

This function allows you to set whether the signal, which comes from VIDEO-1 input terminal,
should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to
"ON".
Press the M
ENU
To VIDEO-1 MONITOR OUT
π †
è
To select ON or OFF
Press the M
ENU
button
ENU
button to finish
ENU
button
ENU
button
button to finish
Initial Setup
RESET
OPERATE
OK
INITIAL SETUP
PREVIOUS
NOISE MUTING
FRONT PANEL LOCK
V1 SMART INPUT
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
NEXT PAGE
SELECT OPERATE
INITIAL SETUP
PREVIOUS
VIDEO-1 MONITOR OUT
DIGITAL-IN
DIGITAL-IN AUDIO
NEXT PAGE
SELECT OPERATE
EXIT
MENU
ON
OFF
ON
LOW
(2/5)
EXIT
MENU
OFF
SIZE1
DIGITAL
(1/5)
EXIT
MENU
51