Advertisement
Connect this
connector on
the wire
harness B
to the
compressor
clutch
connector.
11
13
Snap this wire harness clip into the
hole in the radiator hose clip.
Get parts group D.
15. Install the power relays.
Plug in
the two
2
4P
power
relays
here.
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
Snap this wire
harness clip into the
square hole on the
condenser fan
shroud.
12
Remove the lids
from under-hood
fuse/relay box and
the multi-relay box.
1
3
Plug in the
5P power
relay here,
then
reinstall the
lids.
AII 28737 (0502)
16. Attach the labels in the locations shown.
U.S.A.
17. Reinstall the remaining parts:
Reinstall the front bumper; torque the mounting
bolts to 10 N . m (17 lb-ft).
Reconnect the outside air temperature sensor
2P connector.
NOTE: If the outside air temperature sensor 2P
connector is not properly connected, t he auto
idle stop function will not work correctly.
Reconnect the negative cable to the 12-volt
battery.
Others
13 of 16
Advertisement
